지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 테크노프레스 Structural engineering and mechanics : An international journal Structural engineering and mechanics : An international journal 제60권 제4호
- 발행연도
- 2016.1
- 수록면
- 567 - 594 (28page)
이용수
초록· 키워드
오류제보하기
The main objective of the current research is estimating the flexural behavior of ferrocement Ribbed Plates reinforced with composite material. Experimental investigation was carried out on fifteen plates; their dimensions were kept constant at 1200 mm in length, 600 mm width and 100 mm thick but with different volume fraction of steel reinforcement and number of ribs. Test specimens were tested until failure under three line loadings with simply supported conditions over a span of 1100 mm. Cracking patterns, tensile and compressive strains, deformation characteristics, ductility ratio, and energy absorption properties were observed and measured at all stages of loadings. Experimental results were compared to analytical models using ANSYS 10 program. Parametric study is presented to look at the variables that can mainly affect the mechanical behaviors of the model such as the change of plate length. The results showed that the ultimate strength, ductility ratio and energy absorption properties of the proposed ribbed plates are affected by the volume fraction and the type of reinforcement, and also proved the effectiveness of expanded metal mesh and woven steel mesh in reinforcing the ribbed ferrocement plates. In addition, the developed ribbed ferrocement plates have high strength, ductility ratio and energy absorption properties and are lighter in weight compared to the conventional RC ribbed plates, which could be useful for developed and developing countries alike. The Finite Element (FE) simulations gave good results comparing with the experimental results.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Structural performance of ribbed ferrocement plates reinforced with composite materials
Structural Engineering and Mechanics, An Int＇l Journal
2016 .01
-
Numerical investigation of the buckling behavior of thin ferrocement stiffened plates
Computers and Concrete, An International Journal
2015 .03
-
Impact of openings on the structural performance of ferrocement I-Beams under flexural loads
Structural Engineering and Mechanics, An Int＇l Journal
2024 .05
-
Structural behavior of RC channel slabs strengthened with ferrocement
Structural Engineering and Mechanics, An Int＇l Journal
2023 .06
-
Experimental and FE simulations of ferrocement columns incorporating composite materials
Structural engineering and mechanics : An international journal
2017 .01
-
Shear Behavior of Reactive Powder Concrete Ferrocement Beams with Light Weight Core Material
International Journal of Concrete Structures and Materials
2024 .09
-
Failure analysis of ribbed cross-laminated timber plates
Coupled systems mechanics
2018 .01
-
Structural Performance of Ferrocement Beams Incorporating Longitudinal Hole Filled with Lightweight Concrete
International Journal of Concrete Structures and Materials
2023 .07
-
Topology optimization of steel plate shear walls in the moment frames
Steel and Composite Structures, An International Journal
2018 .01
-
리브가 있는 확대 사각 채널에서 국부 열전달
동력시스템공학회지
2018 .04
-
Soil and ribbed concrete slab interface modeling using large shear box and 3D FEM
Geomechanics & engineering
2017 .01
-
Dynamic characterization of a CNT reinforced hybrid uniform and non-uniform composite plates
Steel and Composite Structures, An International Journal
2019 .01
-
RCC frames with ferrocement and fiber reinforced concrete infill panels under reverse cyclic loading
Advances in concrete construction
2017 .01
-
Dynamic and bending analysis of carbon nanotube-reinforced composite plates with elastic foundation
Wind & structures
2018 .01
-
Strengthening of bolted shear joints in industrialized ferrocement construction
Steel and Composite Structures, An International Journal
2018 .01
-
Analysis of laminated composite plates based on different shear deformation plate theories
Structural Engineering and Mechanics, An Int＇l Journal
2020 .01
-
기어박스의 경량화 및 소음저감을 위한 재질변경 및 리브 효과
한국소음진동공학회논문집
2017 .11
-
Behavior of reinforced concrete plates under impact loading: different support conditions and sizes
Computers and Concrete, An International Journal
2016 .01
-
플레이트의 소성변형 과정이 재건술에서 플레이트 안정성에 미치는 영향
한국CDE학회 논문집
2016 .09
-
Variational approximate for high order bending analysis of laminated composite plates
Structural Engineering and Mechanics, An Int＇l Journal
2020 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0