지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 테크노프레스 Structural engineering and mechanics : An international journal Structural engineering and mechanics : An international journal 제29권 제6호
- 발행연도
- 2008.1
- 수록면
- 643 - 658 (16page)
이용수
초록· 키워드
오류제보하기
In this paper, we present a quadratic element model based on non-conforming displacement modes and modified shape functions. This new and refined 8-node hybrid stress plane element consists of two additional non-conforming modes that are added to the translational degree of freedom to improve the behavior of a membrane component. Further, the modification of the shape functions through quadratic polynomials in x-y coordinates enables retaining reasonable accuracy even when the element becomes considerably distorted. To establish its accuracy and efficiency, the element is compared with existing elements and - over a wide range of mesh distortions - it is demonstrated to be exceptionally accurate in predicting displacements and stresses.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
A direct modification method for strains due to non-conforming modes
Structural engineering and mechanics : An international journal
2001 .01
-
A 2D hybrid stress element for improved prediction of the out-of-plane fields using Fourier expansion
Structural engineering and mechanics : An international journal
2002 .01
-
Variable-node non-conforming membrane elements
Structural engineering and mechanics : An international journal
2003 .01
-
An assumed-stress hybrid element for static and free vibration analysis of folded plates
Structural engineering and mechanics : An international journal
2007 .01
-
Defect-free 4-node flat shell element: NMS-4F element
Structural engineering and mechanics : An international journal
1999 .01
-
Three dimensional non-conforming 8-node solid elements with rotational degrees of freedom
Structural engineering and mechanics : An international journal
1996 .01
-
Non-conforming modes for improvement of finite element performance
Structural engineering and mechanics : An international journal
2002 .01
-
A new quadrilateral 5-node non-conforming membrane element with drilling DOF
Structural engineering and mechanics : An international journal
2002 .01
-
Improved stress recovery for elements at boundaries
Structural engineering and mechanics : An international journal
1997 .01
-
Completeness requirements of shape functions for higher order finite elements
Structural engineering and mechanics : An international journal
2000 .01
-
8절점 Hybrid/Mixed 평면응력요소
대한토목학회논문집 A
2006 .03
-
A simple method of stiffness matrix formulation based on single element test
Structural engineering and mechanics : An international journal
1999 .01
-
An assumed-stress hybrid element for modeling of plates with shear deformations on elastic foundation
Structural engineering and mechanics : An international journal
2009 .01
-
A hybrid 8-node hexahedral element for static and free vibration analysis
Structural engineering and mechanics : An international journal
2005 .01
-
균열선단 부근의 측면함몰로부터 응력삼축성의 결정 방안
대한기계학회 춘추학술대회
2003 .08
-
Natural frequencies of thin plates by means of the finite element method using a conditioned conforming quadrilateral element
Structural engineering and mechanics : An international journal
2008 .01
-
Discrete-Layer Model for Prediction of Free Edge Stresses in Laminated Composite Plates
한국전산구조공학회논문집
2010 .01
-
The stress analysis of a shear wall with matrix displacement method
Structural engineering and mechanics : An international journal
2015 .01
-
The use of the strain approach to develop a new consistent triangular thin flat shell finite element with drilling rotation
Structural engineering and mechanics : An international journal
2018 .01
-
The MIN-N family of pure-displacement, triangular, Mindlin plate elements
Structural engineering and mechanics : An international journal
2005 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0