지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2015.1
- 수록면
- 184 - 193 (10page)
이용수
초록· 키워드
오류제보하기
Objectives: This study focused on three aspects: characterizing concentrations of airborne particles by size distributions and asbestos fibers generated by various building materials; analyzing the characteristics of fibers produced by each simulation and asbestos fibers released from ACBMs; and investigating correlations of airborne asbestos fibers and particles generated and association of particle and asbestos concentrations. Methods: We selected three ACBMs including an insulation board, cement asbestos slate and wallboard. We constructed 4 scenarios; a) crushing with a hammer; b) cutting with a industrial knife; c) brushing with a metal brush; and d) tightening & loosening with a hand drill. We implemented one simulation for 30 seconds followed by 30 seconds resting period. We repeated a total of 5 cycles for 5 minutes. Results: The highest concentration of particulate & fibrous matters was from crushing with a hammer in each scenario followed by brushing with a metal brush, cutting with a industrial knife, and tightening & loosening with a hand drill. For ACBMs studied, asbestos concentrations were highest from an insulation board followed by cement asbestos slate, and wallboard. No difference in terms of concentration was found between an insulation board and asbestos slate. Fibers with $5{\sim}20{\mu}m$ in length were included in 76~90% of total fibrous matters. The distribution of the straight form fibers was greater than that of the curl form. About 90% of $PM_{Total}$ released from ACBMs was consisted of $PM_{10}$ while only 10% of $PM_{Total}$ was $PM_{2.5}$. Particulate matters like $PM_{2.5}$ was significantly correlated with fibrous matters($R^2=0.81$). Conclusions: We found ACBMs can significantly release asbestos fibers as well as $PM_{2.5}$. Concentrations of asbestos generated by ACBMs were well correlated with $PM_{2.5}$.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
자동차 제조 사업장 근로자들의 석면 취급 이력 추정
한국산업보건학회지
2017 .01
-
Investigation and Risk Assessment of Asbestos-Containing Materials used in Buildings
한국산업보건학회지
2018 .01
-
석면함유 공공 건축물의 위해성 평가 및 면적 분포 특성
한국산업보건학회지
2016 .01
-
우리나라 석면함유제품 취급 사업장의 공기 중 석면 농도의 시간적 변화
한국산업보건학회지
2016 .01
-
자연발생석면지역의 토양 내 석면함유율에 따른 비산석면 농도평가 - 활동근거시료채취방법(ABS)과 실시간 섬유 측정 장치(F-1 fiber monitor) 결과 비교 -
한국산업보건학회지
2017 .01
-
폐석면광산 주변 지역의 주택 침적먼지의 석면 검출과 석면폐증의 관련성
한국환경보건학회지
2015 .01
-
석면함유폐기물 취급근로자의 석면노출수준 평가
한국산업보건학회지
2018 .01
-
A case of laryngeal cancer induced by exposure to asbestos in a construction site supervisor
대한직업환경의학회지
2016 .08
-
Review of carcinogenicity of asbestos and proposal of approval standards of an occupational cancer caused by asbestos in Korea
대한직업환경의학회지
2015 .12
-
Incidence of cancers and asbestos-related diseases among residents living near abandoned asbestos mines in Korea: A retrospective cohort study using National Health Insurance Database
대한직업환경의학회 학술대회 논문집
2020 .11
-
Pulmonary Fibrosis caused by Asbestos Fibers in the Respiratory Airway
대한의생명과학회지
2021 .09
-
Disease burden of asbestos related diseases in Korea
대한직업환경의학회 학술대회 논문집
2015 .06
-
실제 환경을 고려한 천장텍스의 석면안정화제 처리 연구
한국산업보건학회지
2016 .01
-
버스 정비 작업자에 대한 석면 및 디젤 엔진 배출물질 노출 평가
한국산업보건학회지
2016 .01
-
국내 석면조사기관의 품질관리 수준에 대한 평가
한국산업보건학회지
2019 .01
-
Identification for Asbestos bodies in the Lung tissues of Syrian hamster after Intratracheal Instillation of Asbestos
대한직업환경의학회 학술대회 논문집
2015 .11
-
Environmental health centers for asbestos and their health impact surveys and activities
대한직업환경의학회지
2016 .12
-
The characteristics of asbestos-related disease claims made to the Korea Workers’ Compensation and Welfare Service (KCOMWEL) from 2011 to 2015
대한직업환경의학회지
2018 .07
-
가평 사문암 광산의 석면 산출의 산상과 모암의 특성
한국산업보건학회지
2016 .01
-
우리나라 일부 석면광산 지역에서 ABS를 이용한 석면노출 및 위해성 평가
한국산업보건학회지
2015 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0