지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 1991.1
- 수록면
- 19 - 26 (8page)
이용수
초록· 키워드
오류제보하기
This study was carried out to investigate the solid wood bending properties of red pine(Pinus densiflora S. et Z.)naturally grown in Korea by boiling treatment The specimens were green and their dimension was $15\times15\times350mm$. The optimum conditions for solid wood bending processing of pine lumber are shown in Table 6 and the minimum solid bending radius was 240 mm in boiling treatment. The effects of knot on the degradation of bending processing properties were very severe and the failures of diagonal and torn grained wood were 20% and 30% respectively.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
양버즘나무의 소재(素材) 및 집성곡목제조(集成曲木製造)에 관(關)한 연구(硏究)(I) - 증자(蒸煮)에 의한 소재(素材)휨가공성(加工性) -
목재공학(Journal of the Korean Wood Science and Technology)
1990 .01
-
자비(煮沸), 증자(蒸煮) 및 약제처리(藥劑處理)가 상수리나무와 소나무의 휨가공성(加工性)에 미치는 영향(影響)
목재공학(Journal of the Korean Wood Science and Technology)
1985 .01
-
소나무재의 휨 가공성에 미치는 섬유경사각의 영향
목재공학(Journal of the Korean Wood Science and Technology)
2001 .01
-
An NMR Relaxation Study of Mg(BH4)2 in Solid
한국분석과학회 학술대회
2011 .11
-
Nondestructive Evaluation of Bending Strength Performances for Red Pine Containing Knots Using Flexural Vibration Techniques
목재공학(Journal of the Korean Wood Science and Technology)
2005 .01
-
Development of Knot Quantification Method to Predict Bending Strength Using X-ray Scanner
목재공학(Journal of the Korean Wood Science and Technology)
2008 .01
-
Effect of Heat Treatment on the Bending Strength and Hardness of Wood
목재공학(Journal of the Korean Wood Science and Technology)
2012 .01
-
Effect of Heat Treatment on the Dimensional Stability and the Bending Properties of Radiata Pine Sapwood
목재공학(Journal of the Korean Wood Science and Technology)
1999 .01
-
Effect of a Metal-strap Thicknesses on the Bending Process
목재공학(Journal of the Korean Wood Science and Technology)
2001 .01
-
Bending Strength of Korean Softwood Species for 120×180 mm Structural Members
목재공학(Journal of the Korean Wood Science and Technology)
2011 .01
-
국산재(國産材) 곡목가구(曲木家具) 제조(製造)를 위한 Microwave-Heating System 활용에 관한 연구(I) - Microwave-Heating에 의한 아까시나무의 소재(素材)휨가공 특성 -
목재공학(Journal of the Korean Wood Science and Technology)
1995 .01
-
Dimensional Stability and Bending Properties of Small Diameter Log Treated by Sap-displacement Method
목재공학(Journal of the Korean Wood Science and Technology)
2000 .01
-
Structural characterization of the Ca₅(PxAS1-xO₄)₃OH solid solution
대한지질학회 학술대회
2009 .10
-
The Effect of Exposure in Elevated Temperatures on Bending Properties of Wood
목재공학(Journal of the Korean Wood Science and Technology)
1999 .01
-
한국산 옻나무의 휨 및 종압축 강도적 성질(I)
목재공학(Journal of the Korean Wood Science and Technology)
1996 .01
-
Effects of Simultaneous Bending and Heating on Characteristics of Flexible Organic Thin Film Transistors
한국진공학회 학술발표회초록집
2013 .02
-
Static Bending 영향에 따른 Ti/Au의 전기적 특성 변화
한국진공학회 학술발표회초록집
2014 .02
-
목재 조립보 헤더의 휨 성능 분석
목재공학(Journal of the Korean Wood Science and Technology)
2007 .01
-
Reliability of metal films on flexible polymer substrate during cyclic bending deformations
한국진공학회 학술발표회초록집
2016 .02
-
마이크로파 가열에 의한 소나무재의 곡가공
목재공학(Journal of the Korean Wood Science and Technology)
1999 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0