지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2005.1
- 수록면
- 13 - 20 (8page)
이용수
초록· 키워드
오류제보하기
This paper deals with flexural vibration techniques as a means of predicting bending strength properties for quarter-sawn and flat-sawn planes of red pine containing knots. Dynamic modulus of elasticity $(MOE_d)$ was calculated from resonance frequency obtained from the flexural vibration induced by a magnetic driver in quarter-sawn and flat-sawn planes of red pine containing knots. The dynamic MOE were well correlated to bending strength properties. Their correlation coefficients ranged from 0.866 to 0.800 for the regression between dynamic MOE and static bending MOE or MOR. The difference of the values between quarter-sawn and flat-sawn was very small. These values were higher than correlation between percentage of total knot diameter to total width of red pine specimen $(K_T(%))$ as well as $K_O(%)$ base upon ASTM D 3737 and static bending strength properties (correlation coefficient r = 0.448~0.704), and were similar to those between static bending MOE and bending MOR (r = 0.850). These results indicate that dynamic MOE obtained from resonance frequency induced by flexural vibration of magnetic driver is able to effectively use for predicting of static bending strength of red pine containing knots as well as static MOE.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Measurement of Dynamic MOE of 3-Ply Laminated Woods by Flexural Vibration and Comparison with Blending Strength and Creep Performances
목재공학(Journal of the Korean Wood Science and Technology)
2006 .01
-
Development of Knot Quantification Method to Predict Bending Strength Using X-ray Scanner
목재공학(Journal of the Korean Wood Science and Technology)
2008 .01
-
Effect of Heat Treatment on the Bending Strength and Hardness of Wood
목재공학(Journal of the Korean Wood Science and Technology)
2012 .01
-
낙엽송 소경각재의 휨 파괴계수 예측
목재공학(Journal of the Korean Wood Science and Technology)
2018 .01
-
The Effect of Exposure in Elevated Temperatures on Bending Properties of Wood
목재공학(Journal of the Korean Wood Science and Technology)
1999 .01
-
Stress wave법에 의한 열적 열화된 목재의 휨탄성계수 예측
목재공학(Journal of the Korean Wood Science and Technology)
1998 .01
-
Effects of Heating Temperature and Time on the Mechanical Properties of Heat-Treated Woods
목재공학(Journal of the Korean Wood Science and Technology)
2015 .01
-
Dimensional Stability and Bending Properties of Small Diameter Log Treated by Sap-displacement Method
목재공학(Journal of the Korean Wood Science and Technology)
2000 .01
-
The Tunnel Number One Knot with Bridge Number Three is a (1, 1)-knot
Kyungpook Mathematical Journal
2005 .01
-
AN ELEMENTARY PROOF OF THE EFFECT OF 3-MOVE ON THE JONES POLYNOMIAL
순수 및 응용수학
2018 .01
-
On the 2-bridge knots of Dunwoody (1,1)-knots
대한수학회보
2011 .01
-
Static Bending Performances of Cross-Laminated Wood Panels Made with Tropical and Temperate Woods
목재공학(Journal of the Korean Wood Science and Technology)
2018 .01
-
INVERTIBLE KNOT CONCORDANCES AND PRIME KNOTS
호남수학학술지
2010 .01
-
Alexander Polynomials of Knots Which Are Transformed into the Trefoil Knot by a Single Crossing Change
Kyungpook Mathematical Journal
2012 .01
-
파티클보드와 아피통단판을 구성 접착한 복합판넬의 휨성질
목재공학(Journal of the Korean Wood Science and Technology)
1991 .01
-
국산재의 파괴인성에 관한 연구 (II) - 활엽수의 모-드 I 파괴 -
목재공학(Journal of the Korean Wood Science and Technology)
1991 .01
-
비파괴평가에 의한 라디에타소나무 단판 및 수지함침시트 표면적층 합판의 휨성능
목재공학(Journal of the Korean Wood Science and Technology)
1998 .01
-
전통 매듭의 조형미와 현대적 활용실태
복식
2010 .12
-
Nondestructive Evaluation of Strength Performance for Heat-Treated Wood Using Impact Hammer & Transducer
목재공학(Journal of the Korean Wood Science and Technology)
2013 .01
-
ON CROSSING NUMBER OF KNOTS
충청수학회지
2006 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0