메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
오태진 (경북대학교 공과대학 염색공학과) 장용석 (경북대학교 공과대학 염색공학과)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제35권 제3호
발행연도
1998.1
수록면
182 - 194 (13page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

이 논문의 연구 히스토리 (4)

초록· 키워드

오류제보하기
In-situ polymerized anisotropic spinning solution of poly(DACYB/TPC) was prepared by low temperature solution polymerization of DACYB and TPC in N-methyl pyrrolidone with addition of equimolar amount of $Li_2CO_3$, which was directly dry-jet wet spun to give high strength (higher than 20 g/d) and high modulus (higher than 720 g/d) aromatic polyamide fiber. Mechanical properties of the fiber was strongly dependent on the dry-jet wet spinning conditions, i.e., spinneret diameter, spin draw ratio, air gap and heat treatment conditions (temperature and tension). Poly(DACYB/TPC) fiber spun through spinning holes with diameter 0.06 mm had higher tensile property than the fiber spun with diameter 0.15 mm at the same spin draw ratio, The latter, however, had higher tensile property than the former at the identical fiber thickness. Fibers prepared by dry-jet wet spinning through the air gap of around 40 mm gave the best properties by enhancing spin draw ratio. Heat treatment (above 25$0^{\circ}C$) under tension (higher than 2 g/d) improved the tensile property of poly(DACYB/TPC) fiber, particularly in tensile modulus.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0