메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
강영아 (부산대학교 공과대학 섬유공학과) 김경효 (부산대학교 공과대학 섬유공학과) 조현혹 (부산대학교 공과대학 섬유공학과)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제36권 제9호
발행연도
1999.1
수록면
645 - 654 (10page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

이 논문의 연구 히스토리 (4)

초록· 키워드

오류제보하기
The structure formation and the changes of mechanical properties in the course of annealing and hot-drawing process of an unoriented amorphous poly(ethylene 2,6-naphthalene dicarboxylate) (PEN) films were investigate using WAXD, DSC, Rheovibron, and etc. The PEN films were annealed at 120, 150, 180, 210, and 24$0^{\circ}C$ and drawn up to maximum drawable ratios at various drawing rates of 100, 200, 300, and 600 %/min and various temperatures of 100, 120, and 15$0^{\circ}C$. The results are as follows: (1) In the development of crystalline structure characterized by WAXD, the annealed PEN films have an intensive increase in the diffraction peak of (010) plane, but the hot-drawn samples have a high increase in the diffraction intensity of (110) plane caused by increasing orientation naphthalene ring. (2) In dynamic viscoelastic behavior, the amorphous dispersion showed at higher temperatures of 50~6$0^{\circ}C$ than $T_{g}$, and the drawing below $T_{g}$ produced an $\alpha$$_2$-dispersion due to an inhomogeneous taut structure. (3) PEN films drawn at 15$0^{\circ}C$ and at lower drawing rates had an isotropic-like transparency in spite of anistropic uniaxial drawing.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0