메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
장동호 (영남대학교 공과대학 섬유공학과)
저널정보
한국섬유공학회 한국섬유공학회지 한국섬유공학회지 제20권 제3호
발행연도
1983.1
수록면
37 - 45 (9page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
The crystallinity, crystallite size, orientation factor, loss modulus, and tan $\delta$ of P.E.T. films which had drawn at different temperature (72$^{\circ}C$, 79$^{\circ}C$) and then annealed at various temperature (150$^{\circ}$, 180$^{\circ}$, 21$0^{\circ}C$) and time (2.5, 10, 30min) were measured by density gradient, WAXD and dynamic viscoelasity test. The degree of crystallinty of P.E.T. film drawn at 72$^{\circ}C$ was similiar to that of 79$^{\circ}C$ in the case of 15$0^{\circ}C$, and 18$0^{\circ}C$ annealing however, it was significantly increased in the case of drawing at 72$^{\circ}C$ and annealing at 21$0^{\circ}C$. The crystallite size and the orientation factor of P.E.T. film having Drawn at 72$^{\circ}C$ were much larger than those of 79$^{\circ}C$, in particular, this tendency was quite evident in the orientation factor. It was found that the order of amorphous molecular chain in the case of 72$^{\circ}C$ drawing was better order than that of 79$^{\circ}C$, which was much remarkable at the heat treatments with low temperature. Those results can be explained by so called the super draw phenememon in the case of draw temperature of 79$^{\circ}C$.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0