메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
박종근 (성균관대학교) 양원 (한국생산기술연구원) 채태영 (한국생산기술연구원) 류창국 (성균관대학교)
저널정보
한국환경에너지공학회 환경에너지공학 열환경공학회지 제14권 제2호
발행연도
2019.12
수록면
17 - 25 (9page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Oxycoal combustion is an alternative technology to the conventional coal-fired power generation, which can directly capture CO₂ from coal combustion with oxygen and recycled flue gas (RFG). Compared to atmospheric oxycoal combustion, the pressurized process has advantages of increased recovery of latent heat and simultaneous NOx/SOx reduction in the flue gas condenser. Due to the increase in the particle concentration proportional to the pressure, however, the reinvention of combustion system is required to minimize the ignition delay and ash deposition while reducing the use of RFG and NOx emission. This study is to develop a design concept for the pressurized oxycoal burner to be used in a 100 kWth test facility. The computational fluid dynamics (CFD) was employed to develop and optimize the design concept by gradually changing the design variables such as the oxidant staging and burner arrangement for oxidant, fuel, and RFG. It was found that the injection of oxidant through nozzles rather than the conventional annular port of a burner is essential to achieve fast mixing and ignition in the burner due to the reduced gas velocity. Deep oxidant staging was helpful for significant suppression of fuel NOx formation. The RFG flow rate was reduced by using it for wall cooling and protection from ash deposition while the pure oxygen was mixed directly with coal for fast ignition and char conversion in a high-temperature flame.

목차

ABSTRACT
1. 서론
2. 해석 대상 및 적용 모델
3. 해석 결과
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2020-539-000281096