메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Dae Sun Choi (Kangwon National University)
저널정보
한국진공학회(ASCT) Applied Science and Convergence Technology Applied Science and Convergence Technology Vol.25 No.6
발행연도
2016.11
수록면
116 - 119 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this study, we fabricated the K<SUP>+</SUP> ion source for the various purposes and investigated the emission characteristics. The fabricated K<SUP>+</SUP> ion source was painted in the tungsten filament to make filament type ion source. The RGA spectra show that the filament type K<SUP>+</SUP> ion source has a good out gassing character, so it can be used in the ultra-high vacuum system. The maximum K<SUP>+</SUP> ion current was 20 mA when filament temperature was 1410 K and filament potential was 50 V. When the filament temperature was 1070 K, the initial beam current was 50 mA and decreased only by 2% during 4 hours. The emitting energy was measured to be 2.04 eV. This low value means that the fabricated specimen is a good K+ ion source. We conclude that this filament type ion source can be used in various fields, including the LEIS research.

목차

Abstract
I. Introduction
II. Experiment
III. Results and Discussion
IV. Conclusions
References

참고문헌 (27)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2019-420-001276367