메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Subhashree Samantasinghar (National Institute of Technology Rourkela) Suresh Prasad Singh (National Institute of Technology Rourkela)
저널정보
한국콘크리트학회 International Journal of Concrete Structures and Materials International Journal of Concrete Structures and Materials Vol.13 No.6
발행연도
2019.9
수록면
769 - 780 (12page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Huge amounts of by-products are generated from industrial processes which affect the environment adversely. Production process of conventional cement is energy demanding and it also emits enormous amounts of greenhouse gases. Geopolymers are the new generation green material that has a great potential of replacing the conventional cementitious materials. The fresh and hardened properties of sodium hydroxide activated binary blends of slag and fly ash based geopolymer paste and mortars are reported in this paper. Experimental outcomes on fresh and hardened properties such as normal consistency, flow value, setting time, drying shrinkage, soundness, and compressive strengths of the geopolymer binders are presented. Additionally, the chemical products, bonding and microstructural changes occurring during the setting and hardening course are examined. The experimental outcomes showed that the physical and mechanical properties of the binders are very much akin to that of conventional cement and the same is significantly influenced by the chemical composition of the source materials, concentration of the activator and the processing environment. The consistency and setting times of geopolymers are found to be within the ranges that are prescribed for ordinary Portland cement. Highest compressive strength of around 44 MPa is obtained for slag based geopolymer mortar that is activated using 8 M sodium hydroxide solution. Fly ash and slag geopolymers exhibited excellent stability against expansion and shrinkage. Raw materials are optimized by design of experiment and the fitted model shows a good relation with the experimental data.

목차

Abstract
1. Introduction
2. Literature Review
3. Materials and Methodology
4. Results and Discussion
5. Conclusions
References

참고문헌 (32)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0