지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한국전기전자재료학회 Transactions on Electrical and Electronic Materials Transactions on Electrical and Electronic Materials 제11권 제4호
- 발행연도
- 2010.1
- 수록면
- 174 - 177 (4page)
이용수
초록· 키워드
오류제보하기
We have developed an environment-friendly etching process, an alternative to the dichromic acid etching process, as a pretreatment of acrylonitrile-butadiene-styrene (ABS) plastic for electroless plating. In order to plate ABS plastic in an electroless way, there should be fine holes on the surface of the ABS plastic to enhance mechanically the adhesion strength between the plastic surface and the plate. To make these holes, the surface was coated uniformly with dispersed chemical foaming agents in a mixture of environmentally friendly dispersant and solvent by the methods of dipping or direct application. The solvent seeps into just below the surface and distributes the chemical foaming agents uniformly beneath the surface. After drying off the surface, the surface was heated at a temperature well below the glass transition temperature of ABS plastic. By pyrolysis, the chemical foaming agents made fine holes on the surface. In order to discover optimum conditions for the formation of fine holes, the mixing ratio of the solvent, the dispersant and the chemical foaming agent were controlled. After the etching process, the surface was plated with nickel. We tested the adhesion strength between the ABS plastic and nickel plate by the cross-cutting method. The surface morphologies of the ABS plastic before and after the etching process were observed by means of a scanning electron microscope.
목차
등록된 정보가 없습니다.
참고문헌 (8)
참고문헌 신청
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
An Environment Friendly Etching Process of ABS Plastic for the Electroless Plating Using Chemical Foaming Agents
한국표면공학회 학술발표회 초록집
2008 .06
-
Surface Modification by Atmospheric Pressure DBDs Plasma: Application to Electroless Ni Plating on ABS Plates
Transactions on Electrical and Electronic Materials
2013 .01
-
Effect of Etching Temperature on Adhesion and Surface Morphology of Acrylonitrile-Butadiene-Styrene (ABS) Based Material for Plating
한국표면공학회 학술발표회 초록집
2017 .11
-
pH Effects of Electroless Ni Plating on ABS Plastics
Corrosion Science and Technology
2004 .01
-
플라스틱(ABS)표면 도금을 위한 연구
한국기계가공학회 춘추계학술대회 논문집
2016 .10
-
ABS 수지상의 도금층 형성을 위한 에칭 방법 연구
한국표면공학회지
2014 .06
-
발포 프라스틱의 착화특성 및 연소가스 분석
한국안전학회지
2001 .01
-
플라스틱 上의 無電解銅鍍金
한국표면공학회지
1972 .07
-
ABC樹脂上의 化學鍍金에서의 最適 Etching 條件에 關한 硏究
한국표면공학회지
1972 .07
-
Improvement of Plating Characteristics between Nickel and PEEK by Plasma Treatment and Chemical Etching
한국표면공학회 학술발표회 초록집
2008 .06
-
결정성 수지의 발포특성
대한기계학회 춘추학술대회
2003 .11
-
Application of Electroless Copper Plating for High Aspect Through-Holes
한국표면공학회 학술발표회 초록집
2008 .06
-
Ductile Characteristics of Carbon Fibers-reinforced Plastics Produced by Nano-scaled Electroless Nickel Plating on Carbon Fiber Surfaces
한국고분자학회 학술대회 연구논문 초록집
2001 .04
-
Influence of Foaming Agents on the Properties of Foamed Concretes Having Various Densities
한국건축시공학회지
2012 .01
-
3D 프린팅 ABS 구조물의 표면 절삭가공 특성
한국기계가공학회 춘추계학술대회 논문집
2015 .10
-
Relationship Between pH and Temperature of Electroless Nickel Plating Solution
한국표면공학회 학술발표회 초록집
2018 .06
-
3D프린터로 제작된 ABS 재료의 레이저 표면 개질 특성 분석
한국생산제조학회 학술발표대회 논문집
2019 .11
-
플라스틱(ABS)표면 회로 생성 공정 개발
대한기계학회 춘추학술대회
2016 .12
-
발포체의 생성원리와 응용
폴리머
1986 .10
-
Adhesion of electroless-plated Cu film on surface modified PET
한국표면공학회 학술발표회 초록집
2014 .05
이 논문의 저자 정보
최근 본 자료
댓글(0)
0