메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
유직수 (군산대학교) 장현 (군산대학교) 김명준 (군산대학교) 가광진 (군산대학교)
저널정보
한국동력기계공학회 동력시스템공학회지 한국동력기계공학회지 제23권 제1호
발행연도
2019.2
수록면
12 - 19 (8page)
DOI
10.9726/kspse.2019.23.1.012

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The purpose of this study is to develop latent heat storage system with a latent heat storage material for using the middle temperature waste heat(100~200℃) from factory. In this experiment, silicon oil as a heat transfer fluid injected from the nozzle plate of the bottom of a latent heat storage vessel. It flows to the upper direction through PCM region and heat is directly transferred between PCM and oil. In this study, direct contact melting behavior between heat transfer fluid (oil) and erythritol (PCM) were visualized in order to investigate the characteristics of heat storage at difference flow rate of heat transfer fluid (1.6~3.6 kg/min) and packed heigh of PCM (230, 450, 600 mm). The experimental result shows that the amount of heat release is influenced by the flow rate of oil and the packed height of PCM. It is found that the volumetric heat transfer coefficient increases when the flow rate of the oil increases.

목차

Abstract
1. 서론
2. 실험장치 및 실험방법
3. 실험결과 및 고찰
4. 결론
References

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2019-550-000476342