지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2019.2
- 수록면
- 69 - 75 (7page)
이용수
초록· 키워드
오류제보하기
The multi-material application for automotive components is increasing, and dissimilar joining is becoming increasingly important. Mechanical fastening is a practical solution for dissimilar joints. FDS is to conclude the rivet is formed by the screw, the process is simple, and the joint performance is uniform. Also, there is less constrained material bonding.
This study saw the effect of process variables on the quality of SOP junction in the FDS joining process of aluminum sheet. SOP is a inventing method similar to the BOP (Bead on plate) in the conventional melt welding to recognize the fastening characteristics of the material (mainly lower) and screw of the core of the fastening force in the FDS Junction as the abbreviation of the Screw on plate. The material used in the experiment was A6061-T6 plate of thickness 2.0mm. The main process parameters are tool force and spindle rotation at the time of penetration, and the experimental plan was designed by the central synthesis method. Reaction (quality) factor was the pull-out load. The maximum tensile load was 4.84kN and 4.87kN for predicted and experimental values, respectively. As a result, the SOP joining test was verified to be simple and accurate to evaluate the FDS joining performance.
This study saw the effect of process variables on the quality of SOP junction in the FDS joining process of aluminum sheet. SOP is a inventing method similar to the BOP (Bead on plate) in the conventional melt welding to recognize the fastening characteristics of the material (mainly lower) and screw of the core of the fastening force in the FDS Junction as the abbreviation of the Screw on plate. The material used in the experiment was A6061-T6 plate of thickness 2.0mm. The main process parameters are tool force and spindle rotation at the time of penetration, and the experimental plan was designed by the central synthesis method. Reaction (quality) factor was the pull-out load. The maximum tensile load was 4.84kN and 4.87kN for predicted and experimental values, respectively. As a result, the SOP joining test was verified to be simple and accurate to evaluate the FDS joining performance.
목차
Abstract
1. 서론
2. 실험방법
3. 결과 및 고찰
4. 고찰
5. 결론
References
참고문헌 (8)
참고문헌 신청
이 논문의 저자 정보
이 논문과 함께 이용한 논문
FDS 체결부 결함 검출을 위한 비파괴 검사 기법 연구
이정연
,
장예림
,
강래형
대한기계학회 춘추학술대회
2023
.03
590DP Steel/AA5052 조합 FDS (Flow Drill Screw) 모니터링 데이터 분석 및 체결 품질에 미치는 공정 변수의 영향
강태영
,
이한주
,
Ka
외 5명
대한용접·접합학회지
2022
.06
Improvement of Electrolyte Layer Coating Quality Using Statistical Optimization
김성용
,
이창우
Journal of the Korean Society for Precision Engineering
2019
.02
다중선형회귀분석을 이용한 무선통신기기의 품질검사 예측
박승화
,
이동희
,
오선혜
외 3명
대한산업공학회지
2017
.10
품질시스템과 신뢰성보증 활동
정원
신뢰성응용연구
2016
.12
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2019-581-000466154