메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
하근동 (단국대)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2018년도 학술대회
발행연도
2018.12
수록면
428 - 433 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Axisymmetric squeezing flow of optically clear resin is derived from the governing equations and numerically predicted with the SIMPLE algorithm for velocity-pressure coupled discretized equations. The static weight load of slide glass sheet is put on the pre-discharged resin droplet and the squeezing dynamics is well defined as the steady motion of thin fluid with the inertia effect and convective terms neglected. At the free boundary of air-resin interface, the capillary pressure develops for the resin body to push further in between the narrow channel between two slide glass plates. This effect of surface tension along with the pressure field at the resin surface on the top slide glass is accounted for the force balance with the weight of top slide glass. After coupled pressure-velocity discretized equations are converged with solutions within the specific tolerance, the outer resin layer boundary is updated reflecting the radial and vertical velocity and time increment. In the next step at arbitrary small time increment, the same procedure of pressure-velocity field is sought from SIMPLE algorithm. For the UV curing effect in the numerical implementation, the applied UV intensity and ignition time is recorded and the viscosity of resin is changed to the value designated from the characteristic viscosity-(UV exposure time) curve. The numerical prediction was tested through three different resin samples and verified with analytic solutions as well as comparison with test results.

목차

Abstract
1. 서론
2. 엄밀해 리뷰 및 수치해석 접근
3. 축대칭 점성 유동문제의 수치해석
4. 해석 결과와 검증
5. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0