메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김재호 (Daejeon university)
저널정보
한국조명·전기설비학회 조명·전기설비학회논문지 조명·전기설비학회논문지 제32권 제11호
발행연도
2018.11
수록면
31 - 36 (6page)
DOI
10.5207/JIEIE.2018.32.11.031

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this study, the fusing current behavior of fire resistant wire and cables were analyzed for reduce the risk of cable functional failure and electrical fires. The cable fusing current and time were measured as a function of current ramping rates, and 10 ∼ 30 times of allowable current using AC and DC power supply with high accuracy DAQ measurement system. Also, the FEM simulation and theoretical calculations(Onderdonk’s and IEC 60364-434 equations) will be performed to determine the validity and reliability of the experimental results. It was determined that the decreasing fuse time was directly proportional to the increasing current ramping rate and multiples of allowable current. The fusing time of non-insulated wire was similar to Onderdonk’s and IEC 60364-434 equations. However, the fusing time of insulated wire is later than the non-insulated wire. The fusing time of the cable and insulated wire did not coincided well with the numerical equation because the numerical equation did not consider the insulation material. The experiment results of the cable fusing time coincided with FEM analysis results of model 3.

목차

Abstract
1. 서론
2. 시뮬레이션 및 실험 방법
3. 실험 및 시뮬레이션 결과
4. 결론
References

참고문헌 (10)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2019-565-000052381