지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
Abstract
1. Introduction
2. Motor’s Seal Structure and Working Principle
3. Contact Stress and Friction Analysis on Seal Structure
4. Simulation Results and Analysis
5. Experimental Research
6. Conclusions
References
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
열관리 시스템 개발을 위한 엔진 웜업 예측 해석 기술 개발
한국자동차공학회 춘계학술대회
2018 .06
Motored Friction Testing for FE Study
한국트라이볼로지학회 학술대회
2018 .10
충돌 해석 시 마찰 모델 적용을 위한 기초 마찰 시험 연구
Tribology and Lubricants
2021 .06
서보모터방식 마찰용접을 이용한 TiAl 합금과 SCM440의 접합에 미치는 용접조건의 영향
열처리공학회지
2016 .01
Performance Enhancement of Motion Control Systems Through Friction Identification and Compensation
한국기계가공학회지
2020 .06
Characteristics of Friction Behavior of Ceramic Friction Materials according to Surface Materials
한국건설순환자원학회논문집
2023 .12
Fundamental Behavior Analysis of SCM440 Steel on Friction and Wear
한국기계가공학회지
2016 .02
Experimental investigation on hysteretic behavior of rotational friction dampers with new friction materials
Steel and Composite Structures, An International Journal
2017 .01
여러 마찰온도에서 유기계마찰재 제동 시 전이막 형성 및 이로 인한 마찰계수의 영향
한국자동차공학회논문집
2018 .01
유기계(NAO) 브레이크마찰재에 함유된 ZrO2, ZrSiO4, Al2O3, Fe3O4 등의 연마재 종류에 따른 마찰특성 연구
대한기계학회 춘추학술대회
2016 .04
열간 단조 공정을 위한 마찰 시험법의 적합성에 관한 연구
한국소성가공학회 학술대회 논문집
2015 .05
전자클러치 마찰재 성능개선 주요인자에 대한 실험적 연구
한국자동차공학회 추계학술대회 및 전시회
2015 .11
1 자유도 로봇 매니퓰레이터에 대한 새로운 마찰 보상 모델
제어로봇시스템학회 국내학술대회 논문집
2021 .06
Heat Transfer Analysis of Al Laminate Film on Battery Packaging Process
Journal of the Korean Society for Precision Engineering
2018 .11
하모닉 감속기가 장착된 모터 구동식 회전 관절의 마찰 보상
한국생산제조학회지
2020 .06
Application of A Reliable Dynamic Friction Model for Accurate Dynamic Model Parameters Estimation of Robot Manipulators
제어로봇시스템학회 국제학술대회 논문집
2022 .11
고온 조건에서의 마찰 댐퍼의 마찰 특성
한국트라이볼로지학회 학술대회
2018 .10
Design and Manufacturing of Portable Friction Stir Welding Machine
유공압건설기계학회 학술대회논문집
2019 .06
Estimation of the dry friction coefficient using a two-dimensional dynamic friction model
한국소음진동공학회 학술대회논문집
2015 .10
Aluminum 소재로 제조된 V-Belt 풀리의 마찰 특성에 관한 연구
한국기계기술학회지
2019 .01
0