지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한국유체기계학회 International Journal of Fluid Machinery and Systems International Journal of Fluid Machinery and Systems Vol.10 No.2
- 발행연도
- 2017.6
- 수록면
- 146 - 153 (8page)
- DOI
- 10.5293/IJFMS.2017.10.2.146
이용수
초록· 키워드
오류제보하기
Sediment flow through hydropower components causes hydro-abrasive erosion resulting in loss of efficiency, interruptions in power production and downtime for repair/maintenance. Online instruments are required to measure/capture the variations in sediment parameters along with collecting samples manually to analyse in laboratory for verification. In this paper, various sediment parameters viz. size, concentration (TSS), shape and mineral composition relevant to hydro-abrasive erosion were measured and discussed with respect to a hydropower plant in Himalayan region, India. A multi-frequency acoustic instrument was installed at a desilting chamber to continuously monitor particle size distribution (PSD) and TSS entering the turbine during 27 May to 6 August 2015. The sediment parameters viz. TSS, size distribution, mineral composition and shape entering the turbine were also measured and analysed, using manual samples collected twice daily from hydropower plant, in laboratory with instruments based on laser diffraction, dynamic digital image processing, gravimetric method, conductivity, scanning electron microscope, X-ray diffraction and turbidity. The acoustic instrument was able to capture the variation in TSS; however, significant deviations were found between measured mean sediment sizes compared to values found in the laboratory. A good relation was found for turbidity (R<SUP>2</SUP> = 0.86) and laser diffraction (R<SUP>2</SUP> = 0.93) with TSS, which indicated that turbidimeter and laser diffraction instrument can be used for continuous monitoring of TSS at the plant. Total sediment load passed through penstock during study period was estimated to be 15,500 ton. This study shall be useful for researchers and hydropower managers in measuring/monitoring sediment for hydro-abrasive erosion study in hydropower plants.
목차
Abstract
1. Introduction
2. Case study site
3. Methodology
4. Results and discussions
5. Uncertainty in measurement
6. Conclusion
References
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Optimization of Hydropower Plants Regarding Hydro-abrasive Erosion
International Journal of Fluid Machinery and Systems
2019 .06
-
Correlation of the Sediment Properties and Erosion in Francis Hydro Turbine Runner
International Journal of Fluid Machinery and Systems
2019 .06
-
Performance Analysis of a Hydro Cyclone Separator to Reduce Losses due to Sediment Erosion in Micro Hydro Francis Turbine
한국유체기계학회 학술대회 논문집
2015 .06
-
A Case Study of Wear in a High Head Francis Turbine Due to Suspended Sediment and Secondary Flow in a Hydropower Plant of Nepal
International Journal of Fluid Machinery and Systems
2020 .12
-
Effect of Sediment Characteristics on the Sediment Erosion in Francis Hydro Turbine
한국신·재생에너지학회 학술대회 초록집
2018 .11
-
Properties and sediment oxygen demand of freshwater sediment
대한환경공학회 학술발표논문집
2015 .10
-
Comparative study of sediment erosion on alternative designs of Francis runner blade
International Journal of Fluid Machinery and Systems
2015 .09
-
Prediction of total sediment load: A case study of Wadi Arbaat in eastern Sudan
Smart Structures and Systems, An International Journal
2020 .01
-
An overview of the hydropower production potential in Bangladesh to meet the energy requirements
Environmental Engineering Research
2021 .12
-
Development Status of Hydropower and Pumped Storage Hydropower
대한전기학회 학술대회 논문집
2020 .10
-
물리적 표토침식모형의 개발과 적용
지하수토양환경
2017 .01
-
Correlation between sediment characteristics and erosion on Francis Hydro Turbine Performance
한국유체기계학회 학술대회 논문집
2018 .07
-
Effect of Sediment Erosion on the Performance of Francis Hydro Turbine Runner
한국유체기계학회 학술대회 논문집
2017 .12
-
A Study of Sediment Erosion in Francis Turbine
한국유체기계학회 학술대회 논문집
2017 .12
-
유역 및 하천 특성을 고려한 유사량 산정공식 유도
한국환경기술학회지
2019 .01
-
프랜시스 수차에서 유사 유입량에 따른 침식예측을 위한 수치해석적 연구
한국유체기계학회 학술대회 논문집
2016 .06
-
RECENT FINDINGS RELATED TO SEDIMENT EROSION IN FRANCIS TURBINES
AFORE
2017 .11
-
250kW급 마이크로수력발전시스템의 설계 방법 및 성능분석
조명·전기설비학회논문지
2021 .06
-
퇴적물 침식 대응기술을 적용한 5kW급 마이크로 횡류 수차의 성능 분석
한국유체기계학회 학술대회 논문집
2016 .06
-
Development and validation of freshwater sediment quality assessment guidelines for trace elements in Korea
Environmental Engineering Research
2022 .08
이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2018-554-001894619