메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Shekhar Aryal (Tribhuwan University) Sailesh Chitrakar (Kathmandu University) Rajendra Shrestha (Tribhuwan University) Ajay Kumar Jha (Tribhuwan University)
저널정보
한국유체기계학회 International Journal of Fluid Machinery and Systems International Journal of Fluid Machinery and Systems Vol.13 No.4
발행연도
2020.12
수록면
692 - 703 (12page)
DOI
10.5293/IJFMS.2020.13.4.692

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The hydropower plants under Himalayan basins are mostly characterized by heavy sediment load due to geographical and metamorphic constraints. Run-off-river projects with limited size of the desilting basins allow suspended sediments to get carried into the turbine components causing wear due to sediment erosion. In the case of high head power plants consisting of Francis turbines, a large portion of the hydraulic energy is transformed into kinetic energy within the guide vanes. This causes various instabilities in the flow due to high acceleration and velocity. Some recent studies have shown that due to the combined effect of the secondary flow around the guide vanes and sediment carrying flow, the size of the clearance gap increases, which further aggravates the performance of the turbine. This study takes a reference of one of the power plants in Nepal containing high head Francis turbines. An in-depth analysis of the effect of the sediment in this power plant and sediment erosion in the turbine components has been performed. A CFD analysis of the guide vanes and runner blades corresponding to the same turbine has been conducted and the results are used to analyze the erosion pattern on the actual turbine. The detailed erosion analysis is made possible with a 3D scanner, such that the eroded regions can be captured and classified based on the flow behavior at those regions. Guide vanes and runner blades are found to be the predominant components affected by erosion. It has been seen that most of the erosion affected regions are originated from increasing clearance gaps between guide vane and facing plates caused due to continuous leakage flow within the two sides of the guide vanes.

목차

Abstract
1. Introduction
2. Background of the studied case
3. Sediment analysis study of erosion in turbine components
4. Numerical setup
5. Results and discussions
6. Repair and Maintenance
7. Conclusion
References

참고문헌 (21)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2021-554-001444516