메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
박주용 (한국해양대학교) 김우성 (한국해양대학교)
저널정보
대한용접·접합학회 대한용접·접합학회지 大韓熔接·接合學會誌 第36卷 第1號
발행연도
2018.2
수록면
90 - 94 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The thermal image of weld pool and its adjacent area contains many useful information related to the weld quality. Occurrence of weld defects such as porosity, slag inclusion, or crack or during welding causes the change of thermal distribution adjacent area where the weld defects occur. The accidental root gap change makes the different temperature distribution also. In this research the various thermal images of flux cored arc welding were obtained by use of a high-speed infrared camera. The thermal image of weld area 2㎝ behind the arc shows thermal image of bead and the corresponding signals of welding current and voltage. The 4 kinds of specimens, V-groove specimens without root gap, with changing root gap, filled partly with slag pieces and coated partly with grease at intervals of 30 ㎜ were used. The thermal images for each case were analyzed by the specific evaluation values, Wt and At, extracted from the thermal image. Wt value indicates the width over the specific thermal intensity and At indicates the area which means the summation of the thermal intensity over the specific value. The analysis result showed a meaningful change of these values when any weld defects occurred. The change of At values was more prominent than the change of Wt value. It means the weld quality can be monitored by the change of At values from the thermal image of weld area during welding.

목차

Abstract
1. 서론
2. 비드 주변의 열강도 및 가설
3. 용접 실험
4. 결과 및 분석
5. 결론
References

참고문헌 (7)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2018-581-001832856