메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
박수범 (고려대) 오진탁 (한국시설안전공단) 주영규 (고려대)
저널정보
대한건축학회 대한건축학회 논문집 - 구조계 大韓建築學會論文集 構造系 第33卷 第11號 (通卷 第349號)
발행연도
2017.11
수록면
3 - 10 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
Recently, the Infrared-Thermography Technique is widely used for nondestructive testing (NDT) of structures due to its convenience. In particular, various techniques have been applied to detect imperfections such as surface defects and welding defects of steel structures. This paper is a part of a study to detect defects in weld zone in steel structures using Infrared Thermography techniques. The temperature on steel structures surface depends on the material and thermal properties such as specific heat, thermal conductivity, and thermal diffusion coefficient. In this study, Infrared thermography technique was used to detect the information on the diagnosis of steel structure in welds. Test specimens were prepared with artificial defects, then the passive and active methods were used to determine damages on the steel structures in welds as well to detect the defects. Finally, defects were observed by comparing infrared thermal image and surface temperature data of defected area with the normal area. Furthermore, the defects were measured using the standard deviation of the temperature corresponding to the weld. For normal weld, the standard deviation of the temperature corresponding to the weld zone was low; although the standard deviation of the weld defects zone was high.

목차

Abstract
1. 서론
2. 적외선 열화상
3. 열화상기법을 활용한 용접부 결함 계측
4. 결과 및 분석
5. 결론
REFERENCES

참고문헌 (14)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0