메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
조준현 (한국에너지기술연구원) 신형기 (한국에너지기술연구원) 조종재 (한국에너지기술연구원) 노철우 (한국에너지기술연구원) 이길봉 (한국에너지기술연구원) 이범준 (한국에너지기술연구원) 최봉수 (한국에너지기술연구원) 나호상 (한국에너지기술연구원) 백영진 (한국에너지기술연구원)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2017년도 학술대회
발행연도
2017.11
수록면
1,423 - 1,428 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (21)

2018

500℃ 터빈 입구 조건의 수백 kWe급 초임계 이산화탄소 발전시스템 테스트루프 개발 연구 초임계 이산화탄소 발전사이클 종합테스트루프 연속 운전 시험 수백 kWe급 초임계 이산화탄소 이중 브레이튼 발전사이클 종합 테스트루프 개발 연구 초임계 이산화탄소 발전시스템 시험장치 설계 및 운전 절차 연구 초임계 이산화탄소 발전시스템 기술 개발 전략 연구 500℃ 대응 kW급 초임계 이산화탄소 발전시스템 종합시험장치 예비 운전 연구 500℃ 터빈 입구 조건을 만족하는 초임계 이산화탄소 발전 사이클 종합 시험장치 전력 생산 예비 운전 연구

초록· 키워드

오류제보하기
To overcome reported failure problems of the turbomachinery for the supercritical carbon dioxide power cycle induced by the high rotational speed and the axial force, an axial impulse type turbo-generator with a partial admission nozzle was designed and manufactured to reduce the rotational speed as well as the axial force. Then, a turbine wheel part was separated by the carbon ring type mechanical seals to use the conventional oil-lubricated tilting-pad bearings. To drive the turbo-generator, a simple transcritical cycle using a liquid CO2 pump was constructed. A 600,000 kcal/h LNG fired thermal oil boiler and a 200 RT chiller were used as a heat source and heat sink. A target turbine inlet temperature and pressure were 200 °C and 130 bar, respectively. Two printed circuit heat exchangers were manufactured for both sides of the heater and cooler. A leakage make-up system by using a reciprocating CO2 compressor, a CO2 supply valve-train to the main loop and the mechanical seal, an oil cooler for the bearings, a load bank and control systems were installed. Before turbine power generating operation, a turbine bypass loop was operated by using an air-driven control valve to determine the system mass flow rate and to make turbine inlet conditions. Then, a 11 kW electric power was obtained under 205 °C and 100 bar of turbine inlet conditions and a continuous operating time was 45 minutes.

목차

Abstract
1. 서론
2. 축류형 초임계 CO₂ 터보 발전기
3. 축류형 초임계 CO₂ 터보 발전기 구동을 위한 테스트루프
4. 축류형 초임계 CO₂ 터보 발전기 전력 생산 운전
5. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0