지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2017.8
- 수록면
- 34 - 40 (7page)
이용수
초록· 키워드
오류제보하기
By means of the flame braze, the welding problems on Aluminum alloy（5A06）and low carbon steel Q235) were mainly researched in this paper. The welding technology adopted in this paper is that a hot-dipped Aluminum coating of ZL102 Aluminum alloy was firstly performed on the surfaces of low carbon steel, then the layer of hot-dipped aluminum and aluminum alloy were welded by the shape of the lap joint. Through the analysis of the microstructure and tensile property of welded joint after the experiment, the experimental results expressed that good welded joint can be attained by application of flame brazing. Fracture location of the joint specimens appears in the coating layer by means of tensile test. The results show that the bond strength of the coating layer was less than that of the brazing seams.
목차
Abstract
1. The welding characteristics of Aluminum and steel
2. The welding technology of Aluminum alloy and steel
3. The results and analyses of the test
4. Conclusion
Acknowledgment
References
참고문헌 (24)
참고문헌 신청
China Welding Society. welding handbook (1), Welding materials, Beijing, Mechanical Industry Press, (1992), 54-70 (in Chinese)
Zhongyao Qi.Welding metallograph, Beijing, Mechanical Industry Press, (1987),41-60 (in Chinese)
Jihe Fu,Welding data handbook, Beijing, Mechanical Industry Press, (1994) ), 135-150 (in Chinese)
Hashimoto M, Ohno H, Endo K et al.,The effect of hybrid layer thickness on bond strength, demineralized dentin zone of the hybrid layer, Dental Materials, 16 (6) (2000), 406-11
C. K. Syn, D. R. Lesuer, J. Wolfenstine, O. D. Sherby, Layer thickness effect on ductile tensile fracture. Metallurgical & Materials Transactions A, 24(24) (1993), 1647-1653
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Effects of Brazing Temperature on Microstructure and High-Temperature Strength of Joints Using a Novel Fourth-Generation Nickel-Based Single Crystal Superalloy
Metals and Materials International
2023 .02
-
알루미늄의 브레이징과 원리
마이크로전자 및 패키징학회지
2017 .01
-
Influence of Various Additional Elements in Al Based Filler Alloys for Automotive and Brazing Industry
대한용접·접합학회지
2015 .10
-
Weldability of Aluminum Alloy and Hot Dip Galvanized Steel by AC Pulse MIG Brazing
대한용접·접합학회지
2021 .04
-
Effect of Various Factors on the Brazed Joint Properties in Al Brazing Technology
대한용접·접합학회지
2016 .04
-
고온 850℃에서의 Alloy 617 용접부재의 저사이클피로
대한기계학회 춘추학술대회
2015 .04
-
Ti 합금과 철강의 이종재료 접합공정 특성 리뷰
대한용접·접합학회지
2021 .12
-
최신의 고능률 브레이징 기술개발 동향
대한용접·접합학회지
2016 .04
-
Aluminium Based Brazing Fillers for High Temperature Electronic Packaging Applications
마이크로전자 및 패키징학회지
2015 .01
-
Mg Alloy(AZ61) 마찰교반용접 조건에 따른 용접부의 온도와 기계적 특성변화
한국생산제조학회지
2017 .08
-
Friction Stir Welding Tool Geometries Affecting Tensile Strength of AA6063-T1 Aluminum Alloy Butt Joint
International journal of advanced smart convergence
2015 .01
-
고온 진공 브레이징을 이용한 초경합금과 스테인리스강의 접합 계면 특성
소성·가공
2020 .12
-
Alloy 617 과 12Cr 이종재료용접부의 신뢰성 평가
대한기계학회 춘추학술대회
2018 .02
-
An investigation on the microstructure and mechanical/electrochemical properties of friction butt welded joint of 5052-H32 aluminum and DP 1200 steel alloys
한국소성가공학회 학술대회 논문집
2019 .05
-
Characteristics of welding residual stress distribution in weld joints effect of phase transformation with high-strength steel
대한용접학회 특별강연 및 학술발표대회 개요집
2023 .05
-
고탄소강 마찰용접부 미세조직 및 기계적 성질에 대한 연구
대한용접·접합학회지
2023 .12
-
A Review of Joining Processes for High Strength 7xxx Series Aluminum Alloys
대한용접·접합학회지
2017 .12
-
Low Cycle Fatigue Behavior and Life Prediction of Alloy 617 Base Metal and the Welded Joints at Room Temperature
대한기계학회 춘추학술대회
2015 .02
-
Current Review on the Research Status of Cemented Carbide Brazing: Filler Materials and Mechanical Properties
Metals and Materials International
2021 .01
-
Development of improvement for mechanical properties of multi-materials lap joint using laser heat source
대한용접학회 특별강연 및 학술발표대회 개요집
2016 .04
이 논문의 저자 정보
최근 본 자료
댓글(0)
0