메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Mojtaba Deilamy Moezzi (Iran Polymer and Petrochemical Institute) Mohammad Karrabi (Iran Polymer and Petrochemical Institute) Yousef Jahani (Iran Polymer and Petrochemical Institute)
저널정보
한국고분자학회 폴리머 폴리머 제41권 제2호
발행연도
2017.3
수록면
250 - 259 (10page)
DOI
10.7317/pk.2017.41.2.250

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Blends of poly(vinylidene fluoride) (PVDF) and fluororubber (FKM) were prepared in an internal mixer by dynamic vulcanization. The effect of FKM, with and without curing system, was studied with respect to the properties of the PVDF/FKM blends. The tensile test showed that the tensile strength and modulus decreased after blending but the elongation-at-break naturally increased because of the presence of rubber in PVDF matrix. The differential scanning calorimetry (DSC) test gave good indications of improved state of miscibility in most blend ratios. The increase of FKM content showed a favorable tendency of PVDF component toward crystallization. The incorporation of FKM as a coblend improved the thermal stability of PVDF, and the temperature at 10% weight loss of the blends increased. This was confirmed by one value of glass transition temperature obtained from DMTA test, which indicated two different values for pure polymers. The rheological tests showed that the complex viscosity and storage modulus of the blends increased with increasing frequency.

목차

Abstract
Introduction
Experimental
Results and Discussion
Conclusions
References

참고문헌 (28)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2017-578-002348530