메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
김석범 (서강대학교) 김광석 (서강대학교) 이준혁 (서강대학교) 이정철 (서강대학교)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2016년도 학술대회
발행연도
2016.12
수록면
971 - 974 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This paper reports the direct assembly of a hydrogel nano-tip onto silicon microcantilevers to investigate wear characteristics of hydrogel atomic force microscope (AFM) tips and their facile regeneration in the case of appreciable tip damage. By directly attaching a hydrogel (polyethyleneglycol diacrylate; PEGDA) nano-tip onto a tipless silicon microcantilever, thorough wear studies of soft hydrogel AFM tips are enabled in comparison with silicon AFM tips at a well-matched resonance frequency or spring constant for the first time. Regardless of the resonance frequency, hydrogel AFM tips outlasted silicon counterparts during the continuous dynamic-mode imaging on a porous silicon substrate at same free vibration amplitudes (10 or 20 nm), amplitude set-point (80% of the free amplitude), and scan rate (1 Hz). The wear-resistant characteristics of hydrogel tips were also observed during the sequential dynamic-mode imaging at varying scan rates (1~50 Hz). When the hydrogel tip was appreciably damaged especially during contact-mode imaging, the worn hydrogel tip attached to a silicon microcantilever could be simply removed by Piranha cleaning and a new hydrogel tip could be attached again. This tip regeneration is an exclusive cost-effective feature of silicon microcantilevers with a hydrogel tip attached which is beneficial to resource-limited or educational settings.

목차

Abstract
1. 서론
2. 제작 방법
3. 실험 결과
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2017-550-002057652