개인구독
소속 기관이 없으신 경우, 개인 정기구독을 하시면 저렴하게
논문을 무제한 열람 이용할 수 있어요.
지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering Vol.33 No.4
- 발행연도
- 2016.4
- 수록면
- 295 - 301 (7page)
이용수
초록· 키워드
오류제보하기
The out-of-squareness is one of the error sources that affect the positioning accuracy of machine tools and coordinate measuring machines. Laser interferometer is widely used to measure the position and angular errors, and can measure the squareness using an optical square. However, the squareness measurement using the laser interferometer is difficult, as compared to other errors due to complicated optics setup and Abbe’s error occurrence. The effect of out-of squareness mainly appears at the face-diagonal of the movable plane. The diagonal displacements are also affected by the position dependent geometric errors. In this study, the squareness estimation techniques via diagonal displacement measurement using the laser interferometer without an optical square were proposed. For accurate estimation and measurement time reduction, the errors selected from proposed discriminant were measured. Discrepancy between the proposed technique with the laser interferometer (with an optical square) result was 0.6 μrad.
목차
1. 서론
2. CMM의 체적 오차와 대각 거리 오차
3. 대각 거리 오차를 활용한 직각도 계산
4. 실험
5. 결론
REFERENCES
참고문헌 (16)
참고문헌 신청
Schwenke, H., Knapp, W., Haitjema, H., Weckenmann, A., Schmitt, R., et al., “Geometric Error Measurement and Compensation of Machines- An Update,” College International Pour la Recherche en Productique Annals-Manufacturing Technology, Vol. 57, No. 2, pp. 660-675, 2008.
Ramesh, R., Mannan, M. A., and Poo, A., “Error Compensation in Machine Tools - A Review Part I: Geometric, Cutting-Force Induced and Fixture- Dependent Errors,” International Journal of Machine Tools and Manufacture, Vol. 40, No. 9, pp. 1235-1256, 2000.
Kiridena, V. and Ferreira, P. M., “Mapping the Effect of Positioning Errors on the Volumetric Accuracy of Five-Axis CNC Machine Tools,” International Journal of Machine Tools and Manufacture, Vol. 33, No. 3, pp. 417-437, 1993.
Lee, K.-I. and Yang, S.-H., “Measurement and Verification of Position-Independent Geometric Errors of a Five-Axis Machine Tool Using a Double Ball-Bar,” International Journal of Machine Tools and Manufacture, Vol. 70, pp. 45-52, 2013.
Lee, K.-I., Lee, J.-C., and Yang, S.-H., “The Optimal Design of a Measurement System to Measure the Geometric Errors of Linear Axes,” The International Journal of Advanced Manufacturing Technology, Vol. 66, No. 1-4, pp. 141-149, 2013.
Ramesh, R., Mannan, M. A., and Poo, A., “Error Compensation in Machine Tools - A Review Part I: Geometric, Cutting-Force Induced and Fixture- Dependent Errors,” International Journal of Machine Tools and Manufacture, Vol. 40, No. 9, pp. 1235-1256, 2000.
Kiridena, V. and Ferreira, P. M., “Mapping the Effect of Positioning Errors on the Volumetric Accuracy of Five-Axis CNC Machine Tools,” International Journal of Machine Tools and Manufacture, Vol. 33, No. 3, pp. 417-437, 1993.
Lee, K.-I. and Yang, S.-H., “Measurement and Verification of Position-Independent Geometric Errors of a Five-Axis Machine Tool Using a Double Ball-Bar,” International Journal of Machine Tools and Manufacture, Vol. 70, pp. 45-52, 2013.
Lee, K.-I., Lee, J.-C., and Yang, S.-H., “The Optimal Design of a Measurement System to Measure the Geometric Errors of Linear Axes,” The International Journal of Advanced Manufacturing Technology, Vol. 66, No. 1-4, pp. 141-149, 2013.
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
대각 거리오차 측정을 통한 정밀 다축기계의 직각도 추정
한국기계가공학회 춘추계학술대회 논문집
2015 .04
-
지지점을 고려한 컬럼 위치에 따른 직각도 구조해석
한국정밀공학회 학술발표대회 논문집
2016 .10
-
The New Measurement Technique based on Reversal Method to Measure the Squareness Error of Two-Linear Axes System
Journal of the Korean Society for Precision Engineering
2019 .01
-
조립 위치 제어를 통한 4축 공작 기계의 직각도 보정에 관한 연구
한국정밀공학회 학술발표대회 논문집
2017 .05
-
공작기계 지지부 설치 상태에 따른 정밀도 평가
한국생산제조학회 학술발표대회 논문집
2024 .07
-
Parallelism Error Compensation of a Large Volume Laser Machining Robot using a Laser Interferometer
Journal of the Korean Society for Precision Engineering
2019 .10
-
레이저 간섭계 시스템의 아베 오차에 따른 대형 접촉식좌표측정기 정확정밀도 추정
한국정밀공학회 학술발표대회 논문집
2022 .10
-
Non-contact monitoring of the tension in partially submerged, miter-gate diagonals
Smart Structures and Systems, An International Journal
2021 .01
-
A Study on the Squareness of Circular Pocket Machining of SCM415 Steel
한국기계가공학회지
2019 .07
-
Square-Diagonal Code in WSNs (Wireless Sensor Networks)
Proceedings of The International Workshop on Future Technology
2017 .07
-
EFFICIENT INVERSION OF LARGE OVERLAPPED BLOCK DIAGONAL MATRIXES
ITC-CSCC :International Technical Conference on Circuits Systems, Computers and Communications
2015 .06
-
Measurement of Location Errors in a Horizontal 4-axis Machine Tool using a Touch Trigger Probe
Journal of the Korean Society for Precision Engineering
2019 .08
-
Effects of local structural damage in a steel truss bridge on internal dynamic coupling and modal damping
Smart Structures and Systems, An International Journal
2015 .01
-
Effects of local structural damage in a steel truss bridge on internal dynamic coupling and modal damping
Smart structures and systems
2015 .01
-
길이표준 및 레이저 간섭계
한국정밀공학회 학술발표대회 논문집
2015 .05
-
건축형태 기술의 정량화에 관한 연구
대한건축학회 학술발표대회 논문집
2018 .04
-
일조권사선제한이 소규모 건축물 형태에 미치는 영향에 관한 기초연구 - 일반주거지역 내 남북방향 블록 중심으로
대한건축학회 학술발표대회 논문집
2021 .10
-
접촉식 3차원 측정기를 이용한 항공용 영상 레이다 시스템의 실용적 지향오차 보정방법
제어로봇시스템학회 논문지
2018 .12
-
Interim Check and Compensation of Geometric Errors to Improve Volumetric Error of Machine Tools
Journal of the Korean Society for Precision Engineering
2018 .06
-
대각선방향을 고려한 얼굴인식
한국컴퓨터정보학회 학술발표논문집
2025 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2016-555-002783427