본 연구에서는 두 종류의 유리 섬유 의치상 강화재인 Quarts Splint<SUP>TM</SUP>Mesh와 SES MESH<SUP>®</SUP>의 의치상 보강 효과와 열 순환이 의치상의 굽힘 강도와 강화재의 강화 효과에 미치는 영향을 알아보고자 하였다. 시편은 2.5 × 10.0 × 65.0 mm 크기로 강화재를 사용하지 않은 대조군, 금속 격자 강화재, Quarts Splint<SUP>TM</SUP>Mesh, SES MESH<SUP>®</SUP>로 보강한 시편을 각각 20개씩 제작하였으며 그 중 10개에는 열 순환을 시행하였다. 3점 굽힘 실험을 시행하여 의치상의 굽힘 강도를 측정하였다. Quarts Splint<SUP>TM</SUP>Mesh와 SES MESH<SUP>®</SUP>로 강화한 군은 대조군보다 유의하게 높은 굽힘 강도를 나타내었으며(P<.05), 금속 격자 강화재로 보강한 군보다 유의하게 낮은 굽힘 강도를 나타내었다(P<.05). 모든 군에서 열 순환을 시행한 경우가 열 순환을 시행하지 않은 경우에 비해 낮은 굽힘 강도를 나타내었지만 대조군에서만 유의한 차이를 나타내었다(P<.05).
This study aimed to investigate the reinforcing effect of two kinds of glass fiber, Quarts Splint<SUP>TM</SUP> Mesh and SES MESH<SUP>®</SUP> and to evaluate the effect of the thermocycling on the transverse strength of the denture base and on the reinforcing effect of the reinforcements. 20 specimens of the size of 2.5 × 10.0 × 65.0 mm were fabricated for each group; control group, metal mesh reinforcement group, Quarts Splint<SUP>TM</SUP> Mesh reinforcement group and SES MESH<SUP>®</SUP> reinforcement group. To find the difference made by the thermocycling, 10 specimens of each reinforcement group were treated by thermocycling. 3-point bending test was performed to measure the transverse strength of the denture base resin. The specimens reinforced with SES MESH<SUP>®</SUP> and Quarts SplintTM Mesh showed significantly higher transverse strength than the control group (P<.05), and significantly lower transverse strength than the specimens reinforced with the metal mesh (P<.05). Thermocycled specimens were lower in transverse strength than non-thermocycled specimens in the control group, metal mesh group, Quarts Splint<SUP>TM</SUP> Mesh group and SES MESH<SUP>®</SUP> group, however significant difference (P<.05) was found only in the control group.