메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김영민 (명지대)
저널정보
대한건축학회 대한건축학회 논문집 - 구조계 大韓建築學會論文集 構造系 第31卷 第4號
발행연도
2015.4
수록면
63 - 70 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this study, the structural performance of glued structural member made of small rectangular lumber was evaluated. The axial strength and elastic modulus of glued structural member were greater than those of the raw wood by 7.4% and 91.7%, respectively. It is estimated that failure modes and material imperfection caused these results. The flexural strength and flexural elastic modulus of glued structural member were about 13.5% lower than those of the raw wood after reflecting size effect. It is estimated that the lowering of these flexural performance was due to the fact that the tensile failure does not proceed smoothly and eventually occurred discontinuous failure at the interface region. The deflection ratio of both the raw wood and glued structural member at the 1st failure mode was about 1/110 which is about twice of the generally accepted serviceability limit of 1/240. This fact shows that both the raw wood and glued structural member satisfy the serviceability criteria sufficiently.

목차

Abstract
1. 서론
2. 소경재 집성목의 제작방법 및 적용사례
3. 소경재 원목 및 소경재 집성목의 구조성능 시험
4. 결론
참고문헌

참고문헌 (12)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2016-540-001471345