메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김아진 (원광대학교) 오승한 (원광대학교) 배지명 (원광대학교)
저널정보
대한치과재료학회 대한치과재료학회지 대한치과재료학회지 제41권 제2호
발행연도
2014.6
수록면
105 - 111 (7page)
DOI
10.14815/kjdm.2014.41.2.105

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (8)

초록· 키워드

오류제보하기
The purpose of this study was to evaluate the shear bond strengths of self-adhesive resin cements between resin adherend and bovine tooth according to polymerization mode. Self-adhesive resin cements used in the study were Bifix SE (Bifix), BisCem (Bis), PermaCem 2.0 (Perma) and U-Cem (UCem). Both self-cure and light-cure mode were performed for each resin cement. Bovine teeth were used and resin adherend block (2.3 mm in diameter × 2.2 mm in height) using composite resin were fabricated. In the case of self-cure mode, specimen were maintained for the setting time specified by manufacturer plus additional 30 minutes under 5 N load and then held in the 37°C dry oven for 90 minutes. In light-cure mode, each surface was light-cured for 20 seconds under the load of 5 N and the process was repeated two times. Then, they were put in the 37°C dry oven for post-irradation time or equivalent specified by the manufacturer plus additional 30 minutes. The shear bond strength was measured by using a universal testing machine (Z020, Zwick, Ulm, Germany) with cross-head speed of 0.75 mm/min with hemi-circular blade. There were no significant differences in the shear bond strengths among the self-adhesive resin cements in light-cure mode. In self-cure mode, the shear bond strength of UCem was significantly higher than others(p<0.05). For UCem, there was no significant difference in shear bond strength between self-cure and light-cure mode(p>0.05). However, the shear bond strengths of Bifix, Bis, and Perma decreased significantly in self-cure mode(p<0.05). For failure patterns, the resin cement was mainly attached to the resin adherend. Therefore, the shear bond strength of UCem in self-cure mode was the highest and was as high as in light-cure mode. Light-cure should be performed to achieve sufficient bond strength in Bifix, Bis, and Perma.

목차

ABSTRACT
서론
재료 및 방법
결과
고찰
결론
참고문헌

참고문헌 (32)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2015-510-002507046