지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
초록· 키워드
오류제보하기
A pure oxygen combustion technology is crucial in Carbon Capture and Storage (CCS) technology especially in capturing of CO₂, where CCS will reduce 9 GtCO₂ by 2050, which is 19% of the total CO₂ reduction amount. To make pure oxygen combustion feasible, a regenerative system is required to enhance the efficiency of pure oxygen combustion system. However, an existing air combustion technology is not directly applicable due to the absence of nitrogen that occupies the 78% of air. This study, therefore, investigates the heat and fluid flow in a regenerative system for pure oxygen combustion by using commercial CFD software, FLUENT. Our regenerative system is composed of aluminium packed spheres. The effect of the amount of packed spheres in regenerator and the effect of presence or absence of a bypass of exhaust gas are investigated. The more thermal mass in regenerator makes the steady-state time longer and temperature variation between heating and regenerating cycle smaller. In the case of absence of bypass, the regenerator saturates because of enthalpy imbalance between exhaust gas and oxygen. We find that 40% of exhaust gas is to be bypassed to prevent the saturation of regenerator.
목차
1. 서론
2. 지배방정식 및 수치해석 방법
3. 결과 및 고찰
4. 결론
References
참고문헌 (15)
참고문헌 신청
1. [보고서] - Lee, M.S. / 2010 / Current response and challenges of the domestic steel industry to reduce greenhouse gas emissions
2. [학술지(정기간행물)] - Kim, K.H. / 2001 / Development of high performance industrial reheating furnace / Theories and Applications of Chemical Engineering 7 : 1925 ~ 1928
3. [보고서] - Noh, D.S. / 1998 / A study on regenerative combustion system matching and regenerator design technology
4. [학술지(정기간행물)] - Muralikrishna, S. / 1999 / Study of heat transfer process in a regenerataor / Chemical Engineering Research and Design 77 : 131 ~ 137
5. [학술지(정기간행물)] - Kang, K.G. / 2001 / Numerical study of fluid flow and heat transfer in a tunnel oven for bakery / Food Engineering Progress 1 : 64 ~ 70
2. [학술지(정기간행물)] - Kim, K.H. / 2001 / Development of high performance industrial reheating furnace / Theories and Applications of Chemical Engineering 7 : 1925 ~ 1928
3. [보고서] - Noh, D.S. / 1998 / A study on regenerative combustion system matching and regenerator design technology
4. [학술지(정기간행물)] - Muralikrishna, S. / 1999 / Study of heat transfer process in a regenerataor / Chemical Engineering Research and Design 77 : 131 ~ 137
5. [학술지(정기간행물)] - Kang, K.G. / 2001 / Numerical study of fluid flow and heat transfer in a tunnel oven for bakery / Food Engineering Progress 1 : 64 ~ 70
이 논문의 저자 정보
이 논문과 함께 이용한 논문
고체 로켓 모터 유동-구조 연성 해석을 위한 침식연소 모델링
이정섭
,
진정근
,
김신회
외 1명
한국추진공학회지
2016
.08
발전용 커먼레일 디젤엔진에 적합한 최적화 연소실형상 설계를 위한 수치해석
김승철
한국가스학회지
2016
.08
Pilot급 산소 MILD 연소에 관한 실험 및 수치해석적 연구
차천륜
,
이호연
,
황상순
설비공학논문집
2016
.07
다단연소사이클 엔진 파워팩 시동해석
이수지
,
문인상
한국추진공학회지
2016
.06
다단연소사이클 엔진 파워팩 시동해석 시뮬레이터 개발 및 검증
이수지
,
윤영빈
,
문인상
한국추진공학회 학술대회논문집
2016
.05
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2014-420-002842716