메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
주현진 (서울시립대학교) 이득행 (서울시립대학교) 황진하 (서울시립대학교) 김강수 (서울시립대학교) 오영훈 (건양대학교)
저널정보
대한건축학회 대한건축학회 논문집 - 구조계 大韓建築學會論文集 構造系 第29卷 第6號
발행연도
2013.6
수록면
39 - 47 (9page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
It is known that steel fiber-reinforced concrete (SFRC) members have enhanced torsional performances, compared to typical reinforced concrete members, but, our understanding on torsional behavior of SFRC members are yet very limited due to insufficient research on this topic. Thus, this study performed torsional tests on SFRC members, in which radial strain gradients developed in thin-walled concrete tube were measured in detail. The shortcomings of current design codes on the torsional strength of heavily reinforced members in transverse direction have been also discussed. Test results showed that the SFRC specimens having larger volume fraction of steel fibers had greater torsional strength and more ductile behavior as well. The compressive strains in the extreme fiber of SFRC members were estimated at about 0.0035 to 0.0040 at ultimate state. All specimens had the initial cracking angle of about 45 degrees, while the inclined angles at ultimate became somewhat smaller. The current code provisions overestimated the torsional strengths of all specimens that were over-reinforced against torsion.

목차

Abstract
1. 서론
2. 실험계획
3. 실험결과 및 비틀림 거동
4. 결론
참고문헌

참고문헌 (31)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2014-500-003336890