메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
곽윤근 (금오공과대학교) 최현태 (금오공과대학교) 권우현 (금오공과대학교) 김우석 (오클라호마대학교) 강현구 (오클라호마대학교)
저널정보
대한건축학회 대한건축학회 논문집 - 구조계 大韓建築學會論文集 構造系 第26卷 第9號
발행연도
2010.9
수록면
15 - 22 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
For the sufficient strength and ductile behavior of RC beam-column joints, closely-spaced lateral confinement reinforcement is required by seismic design codes. However, such seismic design often hinders the economic efficiency and constructability of a structure. The use of steel fibers in RC beam-column joints can improve the cost effectiveness and overcome fabrication complications, such as congested reinforcement details and associated poor concrete placement, without altering its seismic performance. To investigate the effect of steel fibers in RC beam-column joints, an experimental study was carried out under seismic loading conditions. A total of six half-scale joint specimens with seismic details or replacing steel fibers were subjected to three reversed cycles at each drift level up to 6% lateral drift ratio. The variables studied in this investigation are the joint transverse reinforcement amount and steel fiber volume fraction (0, 1, and 1.5%). The results of tests show that lateral load capacity, energy dissipation capacity, shear strength and ductility, and drift capacity are improved with the application of steel fibers of 1.5% but with the same configuration for the rest of the details. Also, a detailed analysis of both global and local data reveals the possibility of substituting steel fibers for some of the transverse reinforcement.

목차

Abstract
1. 서론
2. 보-기둥 접합부 시험체의 개요
3. 실험 결과 및 분석
4. 결론
참고문헌

참고문헌 (4)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2012-540-003672388