본 논문은 액체로켓엔진용 분사기의 유량계수를 측정하는 장치 개선에 대한 결과를 수록하였다. 엔진 제작 품질과 작동 신뢰성을 향상시키기 위해서는 제작한 단품 분사기의 정확한 유량계수 파악이 중요하다. 액체로켓엔진 분사기 유량계수 파악에 있어서 가장 중요한 계측 인자는 분사기 차압과 그에 해당하는 유량이다. 유량계수 측정의 재현성과 정확성을 높이기 위해 기존의 중량 계측 방법에서 실시간 유량계측 방법으로 변경하고, 분사기 차압 측정을 위한 매니폴드 측정 센서의 정밀도를 높이고, 대기 중 압력을 측정하였다.
The paper presents the improvement of a measurement system for flow discharge coefficients of injectors for a liquid rocket engine. It becomes important to accurately estimate the coefficients of individual injectors for the improvement of engine quality and reliability. The most critical parameters for the estimation of the coefficient are injector pressure drop and its corresponding mass flow rate. To increase repeatability and accuracy of the measurement system, the old load measuring subsystem for a flow rate has been replaced by real-time flow meters, and new pressure transducers with better accuracy for the manifold pressure and an atmospheric pressure transducer have been applied.