본 논문에서는 한국형 달탐사선 지상시험모델 착륙장치 낙하시험결과 분석에 관하여 기술하였다. 달탐사선 지상시험모델은 지구중력 대비 1/6중력을 갖는 달환경을 모사하기 위해 한국형 달탐사선 비행모델 중량 550㎏의 약 1/6의 무게를 갖도록 설계된다. 구조체의 크기는 비행모델과 동일하며, 경량화를 위해 고강성 복합재료로 제작하고 패널 및 플랫폼에 컷아웃을 도입하였다. 착륙장치는 알루미늄 하니콤이 삽입되어 충격하중에 노출 시 하니콤의 소성변형을 통해 충격하중을 효율적으로 흡수하도록 되어 있다. 착륙장치 설계검증 및 낙하충격의 상세한 분석을 위해 낙하속도, 토양조건, 예비압축변형, 하니콤 압축강도를 변경하며 시험을 수행하였다. 낙하시험결과 착륙장치가 성공적으로 개발된 것을 확인할 수 있었다.
In this paper, an analysis on the drop test results of Korean lunar lander demonstrator is discussed. In order to realize the state of lunar gravity equal to about 1 over 6 of Earth gravity on the ground, total mass of the demonstrator is decreased from 550㎏ of lunar lander flight model. Overall dimension is almost the same as the flight model. However, for mass reduction, high strength carbon fiber composite sandwich panel is used with many cutouts. To verify the performance of the landing gear, the drop test is performed with several test condition according to impact velocity, soil condition, honeycomb crush strength and precrush effect of aluminum honeycomb. From the test results, it is confirmed that landing gear successfully absorb the shock of landing and is developed by complying with the design requirement.