메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
Hae-Kang Jung (Pohang University) Soo-Min Lee (Pohang University) Jae-Yoon Sim (Pohang University) Hong-June Park (Pohang University)
저널정보
대한전자공학회 대한전자공학회 ISOCC ISOCC 2010 Conference
발행연도
2010.11
수록면
364 - 367 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
By using the data timing control at transmitter (TX), the crosstalk-induced jitter (CIJ) is compensated for in the 2-bit parallel data transmission through the coupled microstrip lines on printed circuit board (PCB). The difference in propagation velocity with the signal modes (odd, static, even) is compensated for by sending data earlier or later at TX according to the signal modes, so that the signals of different modes arrive at receiver (RX) at the same time. This transmitter is implemented by using the delay block with low jitter and a 3:1 Mux to select one CLKT of the generated three different sampling CLKD, in advance. The TX is implemented by using a 0.18 μm CMOS process. The measurement shows that the TX reduces the RX jitters by about 38 ps at the data rates from 2.6 Gbps to 3.8 Gbps.

목차

Abstract
Ⅰ. INTRODUCTION
Ⅱ. CIJ COMPENSATION SCHEME USING THE DATA TIMING CONTROL
Ⅲ. CIRCUIT IMPLEMENTATION
Ⅳ. MEASUREMENT RESULTS
Ⅴ. CONCLUSIONS
REFERENCES

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2013-569-001489715