메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
Eun-Kyu Lee (동아대학교) Hyung-Rim Choi (동아대학교)
저널정보
대한전자공학회 ITC-CSCC :International Technical Conference on Circuits Systems, Computers and Communications ITC-CSCC : 2009
발행연도
2009.7
수록면
1,406 - 1,409 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this study, we propose characteristics improvement methods according to via hole plating method for FBAR Duplexer with US PCS(Tx:1850㎒ ~ 1910㎒, Rx:1930㎒ ~ 1990㎒) bandwidth which is used for wireless systems. Also, we designed and fabricated 3.8*3.8*1.8㎜ size micro-miniature FBAR Duplexer based on this proposal. First of all, in this study, we fabricated pentagon shape resonators by different size to make filter combination, and their quality factor(Q) are 687 with 6.6% of keff2. Using this resonators, designed 3*2Type Tx filter and 3*4Type Rx filter. The transmission line, which works as phase shifter, is designed with 210 ㎛ in width and 18㎜ in length Stripline type. Inductor, which is used for matching component, is designed with width of 75 ㎛, a technically achievable minimum width. And adopted plating method of filling via hole with conductive epoxy for improved grounding and thermal conductivity. Using these configuration with all of the matching component values, we found Duplexer characteristics of -1.57 ㏈ ~ -1.73 ㏈ in insertion loss, -56 ㏈ in attenuation at 1850㎒~1910㎒ of Tx band. Also, found -2.71 ㏈ ~ -3.23 ㏈ in insertion loss, -58 ㏈ in attenuation at 1930㎒~1990㎒ of Tx band.

목차

Abstract
1. Introduction
2.1 Resonator and Filter Design
2.2 Design Matching Component and Duplexer
3. Conclusion
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2012-569-004023453