메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김시영 (부경대학교) 김은봉 (부경대학교) 콴유 (부경대학교) 주창식 (부경대학교)
저널정보
한국동력기계공학회 동력시스템공학회지 한국동력기계공학회지 제14권 제4호
발행연도
2010.8
수록면
50 - 55 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In order to investigate tribological effects of nano copper particles impregnated(CuN) on surface polytetrafluoroethylene(PTFE) on sealing wear and an experimental study was carried out to determine the wear behavior of copper nano-particles impregnation two kind thickness in super critical CO₂ liquid. Experimental results showed that the friction coefficients of CuN?PTFE at the low sliding speed(0.44㎧) and the oil temperature (60℃) were higher than that of virgin PTFE. And a thin nano copper particles impreganated thickness was formed on the surface in the PTFE and the specimen with this treatment has much better friction properties than the original one. Fortunately, at the high load(80 N) and the oil temperature, the friction coefficient of CuN?PTFE was lower than that of virgin PTFE. This evidenced the load carrying capacity of CuN?PTFE was much better than that of virgin PTFE under the high load condition(80 N) specially. Therefore, it can be concluded that the friction coefficient variation of CuN?PTFE is very small but its wear rate decreases greatly with increase in sliding speed.

목차

Abstract
1. 서론
2. 구리 나노입자 함침 및 조직 분석
3. 윤활 마모 시험
4. 결과 및 검토
5. 결론
참고문헌

참고문헌 (5)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2010-550-002748827