메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
인왕기 (한국원자력연구소) 오동석 전태현
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2001년도 열공학/유체공학 부문 공동 추계학술대회 논문집
발행연도
2001.9
수록면
224 - 229 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (3)

초록· 키워드

오류제보하기
The computational fluid dynamics (CFD) method was used to determine an optimum design of hybrid mixing vane in a nuclear fuel bundle. The hybrid mixing vane is a new flow mixing device under development by Korea Atomic Energy Research Institute, which consists of two sets of primary and secondary vanes. Swirling flow and cross flow is primary mechanisms of coolant mixing in the fuel bundle. To maximize the coolant mixing by the hybrid vane, its size and vane angle must be optimized. Assuming an optimum size of the hybrid vane based on engineering judgment, the vane angles, defined as the angle bent from the axial flow direction, were varied from 30˚ to 40˚ and from 25˚ to 45˚ for the primary and secondary vanes, respectively. The swirl mixing increased as both the primary and secondary vane angle increases. The crossflow mixing appeared to increase as the primary vane angle increases and the secondary vane angle decreases. Turbulent mixing showed negligible dependence on the vane angles. Pressure drop due to the hybrid vane continually increased as the vane angle increases. The swirl and cross flow mixing factors were estimated from the predicted velocity distributions in the fuel bundle. The optimal vane angles are judged to be 40˚ and 25˚-35˚ for the primary and secondary hybrid vanes, respectively.

목차

Abstract
1. 서론
2. 수치해석 방법
3. 수치해석 결과 및 고찰
4. 결론
후기
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2010-550-003002131