메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
한국트라이볼로지학회 한국트라이볼로지학회 학술대회 한국윤활학회 2009년도 제48회 춘계학술대회
발행연도
2009.6
수록면
35 - 39 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Friction tests in lubrication environment were performed on polyoxymethylene (POM) thrust washer samples which were groove-patterned by laser surface texturing technique. The width of groove and concentration against the total normal contact were about 100 μn and 20%, respectively. The lubricant used was SAE 5W-30 motor oil and it was stored inside the oil chamber during sliding test. The applied pressure was 12.58 ㎪ and sliding tests were carried out for 10 minutes with different sliding speeds of 0.1, 0.5, and 1.0 m/s. The sliding speeds ensured the steady state of friction. Test results indicated that the coefficient of friction decreases with grooves normal to the rotation direction and the degree of reduction becomes larger with the increase in sliding speed. Few of wear tracks on POM surfaces were found along the sliding direction, and it is concluded that they were from initial contact and subsequent rotational motion, while the steel counterface rests on the POM surface.

목차

ABSTRACT
1. 서론
2. 실험
3. 실험결과 및 고찰
4. 결론
후기
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2010-551-002333616