메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
盧炫志 (경상대학교) 尹相恩 (경상대학교) 朴尙萬 (경상대학교) 李成甲 (경상대학교) 安秉立 (한양대학교)
저널정보
대한전기학회 전기학회논문지 전기학회논문지 제56권 제9호
발행연도
2007.9
수록면
1,609 - 1,613 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
(Ba,Sr,Ca)TiO₃ powders, which were prepared by sol-gel method using a solution of Ba-, Sr- and Ca-acetate and Ti isc-propoxide, were mixed with organic vehicle and the BSCT thick films were fabricated by the screen-printing techniques on high purity alumina substrates. The structural and dielectirc properties were investigated for various Dy₂O₃ doping contents. As a result of thermal analysis, the exothermic peak was observed at around 670℃ due to the formation of the polycrystalline perovskite phase. All BSCT thick films, sintered at 1420℃ for 2h, showed the typical XRD patterns of perovskite poly crystalline structure and no pyrochlore phase was observed. The average grain size of the specimens decreased with increasing amount of Dy₂O₃. The average grain size and thickness of the BSCT specimens doped with 0.1 mol% Dy₂O₃ were approximately 1.9㎛ and 70㎛, respectively. The relative dielectric constant decreased and dielectric loss increased with increasing amount of Dy₂O₃, the values of the BSCT thick films doped with 0.1 mol% DYZ03 were 3697 and 0.4% at 1 ㎑, respectively. The leakage current densities in all BSCT thick films were less than 10?? A/㎠ at the applied electric field range of 0-20 ㎸/㎝.

목차

Abstract
1. 서론
2. 실험
3. 결과 및 고찰
4. 결론
감사의 글
참고문헌
저자소개

참고문헌 (7)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-560-019047950