지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2009.10
- 수록면
- 483 - 490 (8page)
이용수
초록· 키워드
오류제보하기
The objective of this development project is to localize an automatic molten metal supplier that has been distributed by WESTOMAT, Germany, throughout the world. To achieve this purpose, an energy-saving pressurized dosing furnace and molten metal differential pressure control system that is able to automatically supply a determined quantity of aluminum molten metal were developed. The localized equipment was installed in a site. Also, the results of the test operation of this equipment can be summarized as follows:
It was able to improve the productivity because there were small decreases in supplying speeds and small losses in wastes compared to the existing mechanical molten metal supplier. Also, it was able to minimize the cost in maintenances due to the direct application of high temperature molten metals to molds. In addition, there were small energy losses due to the use of high thermal insulators compared to the existing reverberating furnace and able to prolong the life-time of furnaces and produce good quality nonferrous metals because it represented small carbon refractories and alumina in applied molten metals. Furthermore, it demonstrated no particular differences by objectively comparing it with the product by WESTOMAT.
It was able to improve the productivity because there were small decreases in supplying speeds and small losses in wastes compared to the existing mechanical molten metal supplier. Also, it was able to minimize the cost in maintenances due to the direct application of high temperature molten metals to molds. In addition, there were small energy losses due to the use of high thermal insulators compared to the existing reverberating furnace and able to prolong the life-time of furnaces and produce good quality nonferrous metals because it represented small carbon refractories and alumina in applied molten metals. Furthermore, it demonstrated no particular differences by objectively comparing it with the product by WESTOMAT.
목차
Abstract
1. Introduction
2. Main subjects
3. Experiment and results of the site application
4. Conclusion
Acknowledgments
References
참고문헌 (17)
참고문헌 신청
1. [단행본] - Shinjin Furnace Co., Ltd / 2006 / Development of the Technology for an Automatic Molten Metal Supply System in a N in arous Metal Thermal Furnace::::::final inport on the development of local industrial technologies in 2006 / the Ministry of Commerce, Industry and Energy
2. [단행본] - Korea Polytech VII College Changwon Campus / 2006 / Development of the Technology for an Automatic Molten Metal Supply System in a Nonferrous Metal Thermal Furnace: The final report on the development of local industrial technologies in 2004 / the Ministry of Commerce, Industry and Energy
3. [학술대회논문] - Lee, Y. J / 2007 / Localization Case of an Automatic Supplier of Molten Metal in NonFerrous Metal Thermal Furnaces / A treatise in the Spring Congress in 2007 by KSMTE : 86 ~ 91
4. [단행본] - Dongsung Enertech Co., Ltd / 2005 / A Study on the Development of an Automatic Quantified Molten Metal Supplier for Aluminum / The Ministry of Commerce, Industry and Energy
5. [인터넷자원] - Westomat Dosing Furnace / / http://findarticles.com/p/articles/mi_hb3100/ is_200002/ai_n7770672/
2. [단행본] - Korea Polytech VII College Changwon Campus / 2006 / Development of the Technology for an Automatic Molten Metal Supply System in a Nonferrous Metal Thermal Furnace: The final report on the development of local industrial technologies in 2004 / the Ministry of Commerce, Industry and Energy
3. [학술대회논문] - Lee, Y. J / 2007 / Localization Case of an Automatic Supplier of Molten Metal in NonFerrous Metal Thermal Furnaces / A treatise in the Spring Congress in 2007 by KSMTE : 86 ~ 91
4. [단행본] - Dongsung Enertech Co., Ltd / 2005 / A Study on the Development of an Automatic Quantified Molten Metal Supplier for Aluminum / The Ministry of Commerce, Industry and Energy
5. [인터넷자원] - Westomat Dosing Furnace / / http://findarticles.com/p/articles/mi_hb3100/ is_200002/ai_n7770672/
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
비철 금속 보온로 용탕 자동공급 장치 개발
한국기계가공학회 춘추계학술대회 논문집
2007 .11
-
비철 금속 보온로 용탕 자동공급 장치 국산화 개발 사례
한국생산제조학회 학술발표대회 논문집
2007 .05
-
다이캐스팅에서 용탕 유동 해석을 통한 결함 감소에 관한 연구
한국자동차공학회 추계학술대회 및 전시회
2011 .11
-
Molten metal 유동층을 이용한 열분해 기초 실험
KOSCO SYMPOSIUM 논문집
2014 .11
-
Molten metal을 이용한 산성가스 고온습식 정제반응 연구
KOSCO SYMPOSIUM 논문집
2015 .05
-
용탕 회전력 생성장치의 설계에 관한 연구
한국생산제조학회지
2012 .06
-
알루미늄 연속주조 용탕의 탈 가스 일체화 장치 개발
한국생산제조학회 학술발표대회 논문집
2004 .10
-
Development of an integrated degasing system for aluminum molten metal in continuous casting
한국기계가공학회 춘추계학술대회 논문집
2005 .11
-
진공흡입주형 주조법에서 탕구방안에 따른 주형 충전 양상
한국주조공학회지 (주조)
2007 .01
-
알루미늄 용탕 보온로의 열해석 및 하부 구조물의 강도해석
Journal of the Korean Society for Precision Engineering
2005 .10
-
An Implementation of an Integrated Degasing System for Aluminum Molten Metal in Continuous Casting
한국생산제조학회지
2008 .02
-
An Implementation of an Integrated Degasing System for Aluminum Molten Metal in Continuous Casting
한국생산제조학회 학술발표대회 논문집
2007 .10
-
선형유도전동기를 이용한 전자 펌프 실험
대한전기학회 학술대회 논문집
2006 .07
-
Liquid Mechanism of Molten Metal Alloys for Metallic Foam
한국재료학회 학술발표대회
2006 .01
-
응용 금숙 및 합금의 표면물성 평가
한국재료학회 학술발표대회
2005 .01
-
용융 알루미늄내에서 개재물의 크기분포 및 농도측정에 관한 연구
한국주조공학회지 (주조)
1994 .01
-
Reduction of Metal Oxides Compounds by Lithium Metal as a Reductant in Molten LiCl Salt
한국방사성폐기물학회 학술대회
2019 .01
-
공정온도에 따른 주철용탕성상의 추정
한국주조공학회지 (주조)
1995 .01
-
아연-마그네슘 용탕에서의 다양한 상용 금속의 침식 거동
한국표면공학회 학술발표회 초록집
2012 .05
-
용융금속 이송용 전자기 펌프의 유동해석 및 실험
대한기계학회 춘추학술대회
2007 .05
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2009-552-018938347