메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Polyester-type thermoplastic elastomer (below "TPEE") has good oil resistance and chemical resistance as well as excellent low temperature impact property. Thus, it has been widely used in automobile and electric/electronic fields. However, particularly chloroprene rubber (CR), which has been widely used for automobile parts, has poor durability. Recently CR has been replaced with TPE. The use of TPEE has been expanded in North America and Europe since it has a good light weight property, resistant-fatigability, chemical resistance, and ozone resistance, compared with CR. Particularly, since TPEE for extrusion blowing is produced through blowing procedure in the melting state, resin should have good melt viscosity and melt tension in the melting state, and the thickness distribution of processed product during extrusion blowing should be constant.

목차

ABSTRACT
1. 서론
2. 시험
3. 시험결과 및 고찰
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-556-015699821