개인구독
소속 기관이 없으신 경우, 개인 정기구독을 하시면 저렴하게
논문을 무제한 열람 이용할 수 있어요.
지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2008.6
- 수록면
- 105 - 113 (9page)
이용수
초록· 키워드
오류제보하기
The objective of this study was to evaluate the influence of surface modifications on the bonding characteristics and cytotoxicity of specific titanium porcelain bonded to milling titanium and cast titanium. Milling titanium and cast titanium samples were divided into 8 test groups. These groups are as follow: i) sandblasted with particles of different size of 220 ㎛ and 50 ㎛, ii) different sequences of sandblasting treatment and etching treatment, iii) etched with different etching solutions, and iv) preheated or not. The surface characteristics of specimens were characterized by the test of mean roughness of surface and SEM. The bond strength of titanium-ceramic systems was measured by using three-point bending test and SEM. The results show that the mean roughness of surface of sample sandblasted with 220 ㎛ aluminum oxide increased and bond strength were higher than sample sandblasted with 50 ㎛ aluminum oxide. The mean roughness of surface decreased, but the bond strength increased when the samples sandblasted with 220 ㎛ aluminum oxide were preheated. The sample sandblasted with 220 ㎛ aluminum oxide after oxidized with occupational corrosive agent I (50% NaOH, 10% CuSO₄ㆍ5H₂O) and II (35% HNO₃, 5% HF) showed higher bond strength than sample oxidized with 30% HNO3 after sandblasted with 220 ㎛ aluminum oxide. Group NaCuNF220SP (milling Ti: 35.3985 ㎫, casting Ti: 37.2306 ㎫) which was treated with occupational corrosive agent I (50% NaOH, 10% CuSO₄ㆍ5H₂O) and II (35% HNO₃, 5% HF), followed by sandblasting with 220 ㎛ aluminum oxide and preheating at 750℃ for 1 hour showed the highest bond strength and significant differences (P＜0.05). The method for modifying surface of titanium showed excellent stability of cells.
목차
서론
재료 및 방법
결과
고찰
감사의 글
REFERENCES
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
표면 변화에 따른 주조용 티타늄 합금과 도재와의 결합강도 변화에 관한 연구
대한치과기공학회지
2008 .01
-
Forefront of dental application of titanium
대한치과재료학회 학술대회
2014 .11
-
티타늄 임플란트 표면처리에서의 나노테크놀로지
대한치과의사협회지
2010 .02
-
비스포스포네이트가 코팅된 티타늄 표면의 세포독성 평가
대한치과재료학회지
2011 .03
-
Titanium 금속에서 Grade란?
대한치과의사협회지
1998 .12
-
Titanium oxide films produced on pure titanium by anodic oxidation with different ultrasonic irradiation time
대한치과재료학회 학술대회
2009 .04
-
Titanium surface Modifications of Titanium Implant : Thin Apatite Coating and Protein Immobilization
대한치과재료학회 학술대회
2012 .11
-
Effect of different surface treatments on the shear bond strength of luting cements used with implant-supported prosthesis: An in vitro study
The Journal of Advanced of Prosthodontics
2020 .01
-
Characterization of surface oxide films and cell toxicity evaluation with quenched titanium surface
대한치과재료학회 학술대회
2008 .05
-
The effect of ZrN coating for improved esthetics on shear bond strength between Cp titanium and heat-cured denture base resin
Oral Biology Research
2016 .01
-
치과용 임플란트 적용을 위한 항균력을 가진 티타늄 표면의 평가
치위생과학회지
2011 .01
-
임플랜트용 티타늄 및 티타늄 합금의 표면처리
대한치과재료학회지
2008 .12
-
화학적 처리가 티타늄의 생체활성도에 미치는 영향
대한치과보철학회지
2005 .01
-
In vitro에서 titanium이 구강미생물에 미치는 영향
대한치과기공학회지
1999 .01
-
Properties of titanium alloys for dental applications
대한치과재료학회 학술대회
2009 .11
-
Surface Characteristics of Titanium Implant Modified by Blasting and Acid-etching
대한치과재료학회 학술대회
2011 .05
-
Gene Expression of Osteosarcoma Cells on Various Coated Titanium Materials
Molecular & cellular toxicology
2007 .01
-
Research Topics of Titanium in Dentistry
대한치과재료학회 학술대회
2004 .02
-
Biological responses of osteoblast-like cells to different Titanium surface by anodizing modification
대한치과보철학회지
2005 .01
-
Microstructure Analysis of Cast Titanium Surface Modified by Nd : YAG Laser
대한치과재료학회 학술대회
2011 .05
이 논문의 저자 정보
최근 본 자료
댓글(0)
0