메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
대한건축학회 대한건축학회 논문집 - 구조계 大韓建築學會論文集 構造系 第24卷 第5號
발행연도
2008.5
수록면
51 - 58 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (7)

초록· 키워드

오류제보하기
The objective of this research is to provide applicable flexural test results to actual strengthening design by checking the flexural capacities of RC beams strengthened with unbonded high-strength bars. The advantages of a proposed strengthening method consist in speed and simplicity of installation. Also, it is possible to acquire regular strengthening performance without skilled workers. A set of ten laboratory tests on RC beams strengthened with high-strength bars and unstrengthened RC beams as control group is reported. The main test parameters are the diameter of high-strength bar and the ratio of tension reinforcement. The equivalent tension reinforcement ratio which contains the strength ratio of high-tension bars respect to that of re-bar is also considered. Test result shows that the maximum strain of high-strength bars pretensioned with 40% of yield strain exceeds the nominal yield strain of high-strength bar. The deflection ratios of reinforced beams with high-strength bars were less than 54% compared that of serviceability limit. It is possible to simplify the design equation using the equivalent tension reinforcement ratio.

목차

Abstract
1. 서론
2. 실험
3. 실험 결과
4. 강봉 보강된 보의 공칭 모멘트
5. 분석 및 고찰
6. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-540-014724983