메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
한국생산제조학회 한국생산제조학회 학술발표대회 논문집 한국공작기계학회 2007 추계학술대회 논문집
발행연도
2007.10
수록면
306 - 311 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this study, to develop the system that automates cleansing and detecting defects simultaneously during the winding of 2㎜ width and 5m length optical ribbon fiber, from the phase of system design, fabrication and evaluation were performed. To wind the group of four eight optical ribbon fiber and detect defects simultaneously, the system was subdivided into main frame, control, power transfer and detecting units, and then each was designed and manufactured. To automate the defect detecting in real time, APSIS program was developed with the completion of integrated operating control protocol and PCB. The winding speed is maximum 26m/min. the defect detecting rate is approximately 33ms/shot. As overlapped inspection was possible within the detecting interval, the occurrence of omission was zero. According to the assessment, when applying the developed automated system the work efficiency was improved by 200 percent compare to that of the existing manually done operations and the defect detecting rate is above 99 percent.

목차

Abstract
1. 서론
2. 시스템 설계 및 제작
3. 시스템 성능평가
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-552-016182716