메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
한국자동차공학회 한국자동차공학회 춘 추계 학술대회 논문집 한국자동차공학회 2007년 춘계학술대회 논문집 Volume III
발행연도
2007.6
수록면
1,793 - 1,800 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Friction characteristics of automotive friction materials according to the types of fiber were investigated by using a 115 scale brake dynamometer. fiber materials used in the study are aramid, mineral fiber respectively, while keeping other ingredients, such as binders, lubricants, abrasives, fillers the same. In the entire mode of friction test the friction coefficients of all the specimens show different among different pads even under the same temperature condition. In the effectiveness test, friction coefficients decrease with increase in the mineral fiber and aramid-containing friction material FB4 shows the highest coefficients. In the 1st fade test, fade phenomena is decreased with increase in the mineral fiber. The fade rate of FB1(scotching) is higher than the FB1. And 2nd fade rate is higher than 1st fade rate for each specimen. All the specimens tested showed a good recovery rate. The standard deviations of friction coefficient during entire mode for all the specimens were more stable with increase in the mineral fiber and FB1(scotching) is more stable than FB1.

목차

Abstract
1. 서론
2. 실험방법
3. 실험결과 및 고찰
4. 결론
References
후기

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-556-016820464