메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
한국해양공학회 한국해양공학회지 한국해양공학회지 제11권 제3호
발행연도
1997.8
수록면
56 - 68 (13page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This work was intended to study the effect of a partial pressure ratio and a total pressure of reactive gases on the properties of TiC<SUB>x</SUB>N<SUB>1-x</SUB> coated layer. In this regard, various TiC<SUB>x</SUB>N<SUB>1-x</SUB> coatings were synthesized with C₂H₂ and N₂ mixture gas of different compositions by Arc Ion Plating process which has been highlighted for an industrial purpose. It was revealed from colors and X-ray diffraction patterns that the concentration of carbon of a TiC<SUB>x</SUB>N<SUB>1-x</SUB> coating increases with a partial pressure ratio (PC₂H₂/PN₂) as well as a total pressure of C₂H₂ and N₂ mixture gas. Accordingly, the hardness of TiC<SUB>x</SUB>N<SUB>1-x</SUB> coated layer increased but the adhesion to the substrate of SKH 51 was degraded. On the other hand, the deposition rate was independent of a partial pressure ratio and a total pressure of mixture gas. It was found that a uniform gas distribution is critical for an industrial application since the composition of a coating depends strongly on the location of a substrate inside of the furnace. As a result of milling tests with different TiC<SUB>x</SUB>N<SUB>1-x</SUB> coated end mills, the one which has a low carbon concentration was better than others studied in this work.

목차

Abstract
Ⅰ. 서론
Ⅱ. 실험방법
Ⅲ. 연구결과 및 고찰
Ⅳ. 결론
參考文獻

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-559-015522115