메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 2000년도 동계학술발표회 논문집(Ⅰ)
발행연도
2000.11
수록면
32 - 38 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Boiling heat transfer coefficient in a horizontal flow was measured for standard and welded micro-fin tubes containing each of R-22, an HCFC-type pure refrigerant, and its alternate, R-407C and R-410A. The average temperature of evaporator was maintained within the range of 4.9℃~5.2℃, and the heat flux and mass flux were chosen within the ranges of 7.04㎾/㎡~13.86㎾/㎡ and 183.6㎏/㎡s~288.5㎏/㎡s, respectively. Thermo-couple was attached to the top, middle, and bottom surfaces of the evaporator tube to observe the flow regime in evaporator. The flow pattern in evaporator was also visualized by means of flow visualization section composed of Pyrex tube. Stratified flow and wavy flow were found at some low quality regions but annular flow was observed throughout most of the evaporating process.

목차

ABSTRACT

1. 서론

2. 실험장치 및 방법

3. 실험결과 및 고찰

4. 결론

참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-553-015413771