메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 1996年度 동계학술발표 논문집
발행연도
1996.11
수록면
169 - 173 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Using HCFC-22, condensing and evaporating heat transfer and pressure drop flow characteristics were measured for performance evaluation comparison of before and after pipe expanding in tube condensation and evaporation experimentally. Condenser and evaporator are subdivided into 3 parts, respectively : pre part, test part, after part. Pre part controls test part inlet quality and after parts control system pressure. Test parts has straight, horizontal tube with a length of 0.49m. The range of test part's conditions were : system pressure of 1.9 to 2.1㎫ in condenser and 0.47 to 0.63㎫ in evaporator. Mass velocity of 175 to 290 ㎏/㎡s in condenser and 170 to 295 ㎏/㎡s in evaporator. The measured condensing and evaporating heat transfer and pressure drop of after pipe expanding were compared to those of before pipe expanding under the same operating conditions. The result is that condensing heat transfer coefficients has no influence on pipe expanding, but before pipe expanding is higher than after in evaporator.

목차

Abstract

1. 서론

2. 실험 장치 및 방법

3. 실험 결과 및 토의

4. 결론

후기

참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-553-015389543