메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
An ozone tester, equipped with apparatuses measuring either stress relaxation of specimens at constant strain or creep of themm at constant stress, was made in order to investigate differences of ozone degradation caused by different loading conditions. Sheets of butyl rubber blended with EPDM in three levels were specially made in this study. Mechanical property of the sheet with each mix were varied by the degree of vulcanization. At first step, the specimens were exposed to ozone in the ozone tester controlled at a concentration of 50pphm at 40c, and stresses or strains of them were recorded during the test. The specimens were periodically inspected with cracks or rupures if any. Good ozone resistance was observed with lower vulcanized samples in the test with constant strain, on the contrary, was observed with higher vulcanized samples in the test with constant stress. The results obtained were considered to depend on the visco-elastic behavior of samples, then a new factor expressing loading levels, an average of apparent strain energy, which can be obtained by integrating values of strain energy and dividing it by the period to failure. The availability of the new factor was approved by additional ozone tests with different loading conditions.

목차

등록된 정보가 없습니다.

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-540-012928892